ebacaeb0-8fa2-48c9-bba4-bd290f1a681d Silicone-based products, group 1 Silikonbasierte Produkte, Gruppe 1 Kunststoffe Dichtmassen Silikon 02 Building products Membranes, including Liquid applied and kits Building sealants Silicone-based products, group 1 with a Volatile Organic Compound (VOC) content ≤2 % (VOC definition according to Decopaint Directive) are manufactured from reactive siloxane and so-called silicone oil, optionally by using fillers, extenders, colour pigments, cross-linkers, bonding agents and catalysts. For most of the applications the products are formulated as moisture-reactive one-component systems; for industrial applications there are also two-component systems available. They permanently and elastically seal joints planned for the building. Silicone-based products fulfil key functions. Ingress of moisture into the structure via the joints is prevented by joint sealants. With the use of silicone-based products, the fitness for use of the building and the service life are decisively extended. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). 0 Silicone-based products, group 1 with a Volatile Organic Compound (VOC) content ≤2 % (VOC definition according to Decopaint Directive) are manufactured from reactive siloxane and so-called silicone oil, optionally by using fillers, extenders, colour pigments, cross-linkers, bonding agents and catalysts. For most of the applications the products are formulated as moisture-reactive one-component systems; for industrial applications there are also two-component systems available. They permanently and elastically seal joints planned for the building. Silicone-based products fulfil key functions. Ingress of moisture into the structure via the joints is prevented by joint sealants. With the use of silicone-based products, the fitness for use of the building and the service life are decisively extended. According to the Model EPD system (IBU) and the guideline and the substance list (available for members of the trade associations FEICA, EFCC, IVK and DBC), the environmental impacts of the substances are condensed to a single score; the single score of a formulation is calculated based on the single score of the substances. The products are grouped according to their single score (group 1 to 3), the formulation displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). Technical data: The density of the products is between 1,00 and 1,50 g/cm³, other relevant technical data can be found in the manufacturer’s technical documentation. Module 1: Façade sealants The minimum requirements on water and airtightness as per Table ZA.1 of EN 15651-1 apply: see table Module 2: Sealants for glazing The minimum requirements on water and airtightness as per Table ZA.1 of EN 15651- 2 apply: see table Module 3: Sanitary sealants The minimum requirements on water and airtightness as per Table ZA.1 of EN 15651-3 apply: see table Module 4: Sealants for pedestrian walkways The minimum requirements on water and airtightness as per Table ZA.1 of EN 15651-4 apply: see table Module 5: Bonded glazing sealants Structural Sealants must comply with ETAG 002-1 used as EAD. Declared unit: This EPD refers to the declared unit of 1 kg of silicone-based product, group 1; applied into the building with a density of 1.0 - 1.5 g/cm³ in accordance with the IBU PCR part B for construction sealants. The results of the Life Cycle Assessment provided in this declaration have been selected from the product with the highest environmental impact (worst-case scenario). Depending on the application, a corresponding conversion factor such as the density to convert volumetric use to mass must be taken into consideration. The Declaration type is according to EN 15804: Cradle to gate with options, modules C1–C3, and module D (A1–A3, C, D) and additional modules (A4-A5). Produkte auf Silikonbasis, Gruppe 3 mit einem Gehalt an flüchtigen organischen Verbindungen (VOC) ≤30 % (VOC-Definition gemäß Decopaint-Richtlinie) werden aus reaktivem Siloxan und so genanntem Silikonöl hergestellt, gegebenenfalls unter Verwendung von Füllstoffen, Extendern, Farbpigmenten, Vernetzern, Haftvermittlern und Katalysatoren. Für die meisten (der) Anwendungen sind die Produkte als feuchtigkeitsreaktive Einkomponentensysteme formuliert; für industrielle Anwendungen stehen auch Zweikomponentensysteme zur Verfügung. Sie dichten die am Bau geplanten Fugen dauerhaft und elastisch ab. Produkte auf Silikonbasis erfüllen wichtige Funktionen. Das Eindringen von Feuchtigkeit in das Bauwerk über die Fugen wird durch Fugendichtstoffe verhindert. Durch den Einsatz von silikonbasierten Produkten werden die Gebrauchstauglichkeit des Gebäudes und die Lebensdauer entscheidend verlängert. Nach dem Muster-EPD-System (IBU) und dem Leitfaden und der Stoffliste (erhältlich für Mitglieder der Fachverbände FEICA, EFCC, IVK und DBC) werden die Umweltwirkungen der Stoffe zu einem Single Score verdichtet; aus dem Single Score der Stoffe wird der Single Score einer Formulierung berechnet. Die Produkte werden entsprechend ihrer Einzelpunktzahl in Gruppen eingeteilt (Gruppe 1 bis 3), wobei die Formulierung mit den höchsten Umweltauswirkungen als repräsentatives Produkt für die Berechnung der Ökobilanzergebnisse verwendet wurde (Worst-Case-Ansatz). Module 1: Façade sealants Silicone-based products are used for the elastic sealing of joints. The areas of application for façade sealants include expansion joints (movement joints) and/or connection joints already existing in exterior walls and on window and door frames (including the inside section). All these sealants fulfil key functions of the building. Module 2: Sealants for glazing Silicone-based products are used for the elastic sealing of joints which may be subject to movement. Sealants for glazing are used in the following areas: (i)Glass to glass (ii)Glass to frame (iii)Glass to porous substrates Module 3: Sanitary sealants The areas of application for silicone-based sanitary sealants are joints in sanitary areas and kitchens. Joints sealed using sanitary sealants comprise connection joints between sanitary furnishings and the wall, connection joints between the floor and wall or movement joints across surfaces, for example. Module 4: Sealants for pedestrian walkways The areas of application for silicone-based sealants for pedestrian walkways are floor joints designed for pedestrian walkways, public areas, movement joints between concrete slabs, areas with pedestrian load, areas used with trolleys, walkable floors, balconies, terraces, warehouses. Module 5: Bonded glazing sealants One- and two-component structural sealants are to be used in a structural sealant glazing system (SSGK) to bond glazing products to metallic structural seal support frames and/or as the second barrier of the structural hermetic seal in insulating glass units. Modul 1: Fassadendichtstoffe Produkte auf Silikonbasis werden zur elastischen Abdichtung von Fugen eingesetzt. Zu den Anwendungsbereichen von Fassadendichtstoffen gehören Dehnungsfugen (Bewegungsfugen) und/oder bereits vorhandene Anschlussfugen in Außenwänden sowie an Fenster- und Türrahmen (auch im Innenbereich). Alle diese Dichtstoffe erfüllen wichtige Funktionen des Gebäudes. Modul 2: Dichtstoffe für Verglasungen Produkte auf Silikonbasis werden für die elastische Abdichtung von Fugen verwendet, die Bewegungen ausgesetzt sein können. Dichtstoffe für Verglasungen werden in folgenden Bereichen eingesetzt: (i) Glas zu Glas (ii) Glas zu Rahmen (iii) Glas zu porösen Untergründen Modul 3: Sanitärdichtstoffe Die Anwendungsbereiche für Sanitärdichtstoffe auf Silikonbasis sind Fugen im Sanitärbereich und in Küchen. Fugen, die mit Sanitärdichtstoffen abgedichtet werden, sind z.B. Anschlussfugen zwischen Sanitäreinrichtung und Wand, Anschlussfugen zwischen Boden und Wand oder Bewegungsfugen über Flächen. Modul 4: Dichtstoffe für Fußgängerwege Anwendungsbereiche für Silikondichtstoffe für Fußgängerwege sind Bodenfugen für Fußgängerwege, öffentliche Bereiche, Bewegungsfugen zwischen Betonplatten, Bereiche mit Fußgängerbelastung, Bereiche mit Laufkatzen, begehbare Böden, Balkone, Terrassen, Lagerhallen. Modul 5: Verklebte Verglasungsdichtstoffe Ein- und Zweikomponenten-Strukturdichtstoffe sind in einem Structural Sealant Glazing System (SSGK) zu verwenden, um Verglasungsprodukte mit metallischen Strukturdichtungs-Tragrahmen zu verbinden und/oder als zweite Barriere der strukturellen hermetischen Abdichtung in Isolierglaseinheiten. EPD Building sealants.pdf template dataset GaBi Database (all versions) GaBi database SP40 2020 Scope: This verified EPD entitles the holder to bear the symbol of the Institut Bauen und Umwelt e.V. It exclusively applies for products produced in Europe and for a period of five years from the date of issue. This EPD may be used by members of DBC, EFCC, FEICA and IVK and their members provided it has been proven that the respective product can be represented by this EPD. For this purpose, a guideline is available at the secretariats of the four associations. The members of the associations are listed on their respective websites. System boundary: Modules A1, A2 and A3 are taken into consideration in the LCA: - A1 Production of preliminary products - A2 Transport to the plant - A3 Production incl. provision of energy, production of packaging as well as auxiliaries and consumables and waste treatment - A4 Transport to site - A5 Installation, product applied into the building during A5 phase operations and packaging disposal. This stage considers VOC emissions during the installation phase. The declared product does not contain substances in(to) the formulation that directly emit as VOC, but VOCs are generated by a chemical reaction that is occurring during this phase. The end of life for the packaging material considered is described below: -Incineration, for materials like plastic, paper and wood. -C1-C2-C3-D The building deconstruction (demolition process) takes place in the C1 module which considers energy generation and consumption of diesel and all the emissions connected with the fuel-burning process to run the machines. After the demolition, the product is transported to the end-of-life processing (C2 module) where all the impacts related to the transport processes are considered. For precautionary principle and as a worst-case scenario, thermal treatment is the only end-of-life scenario considered. This is modelled by the incineration process (module C3) where the product ends its life cycle. Module D accounts for potential benefits that are beyond the defined system boundaries. Credits are generated during the incineration of wastes and related electricity produced that are occurring in the A5 module. Silicone-based products, group 1 .pdf Institut Bauen und Umwelt e. V. DIN EN 15804+A2 ISO 14025 FEICA - Association of the European Adhesive and Sealant Industry Sphera Solutions GmbH 2022-08-31T10:23:34.905 ILCD Format EPD-Datenformaterweiterungen v1.2 EPD Data Format Extensions v1.2 00.02.000 Silicone-based construction sealants Institut Bauen und Umwelt e. V. EPD-DBC-20220179-IBF1-EN FEICA - Association of the European Adhesive and Sealant Industry true Free of charge for all users and uses None Institut Bauen und Umwelt e. V. Silicone-based product, group 1 (1kg of silicone-based product, group 1) 1 Renewable primary energy as energy carrier (PERE) Erneuerbare Primärenergie als Energieträger (PERE) General reminder flow Input MJ 37.658608844325 0.04346010975 1.307968362 1.201458581E-05 0.0005245659266 0.09362619296 -2.168403909 Renewable primary energy resources as material utilization (PERM) Erneuerbare Primärenergie zur stofflichen Nutzung (PERM) General reminder flow Input MJ 0.905 0 -0.905 0 0 0 0 Total use of renewable primary energy resources (PERT) Total erneuerbare Primärenergie (PERT) General reminder flow Input MJ 38.563608844325 0.04346010975 0.4029683623 1.201458581E-05 0.0005245659266 0.09362619296 -2.168403909 Non renewable primary energy as energy carrier (PENRE) Nicht-erneuerbare Primärenergie als Energieträger (PENRE) General reminder flow Input MJ 81.08864107578 0.7739228357 8.43164157 0.003814072491 0.1665252971 10.00218467 -10.55152613 Non renewable primary energy as material utilization (PENRM) Nicht-erneuerbare Primärenergie zur stofflichen Nutzung (PENRM) General reminder flow Input MJ 16.81 0 -7.36 0 0 -9.45 0 Total use of non renewable primary energy resources (PENRT) Total nicht erneuerbare Primärenergie (PENRT) General reminder flow Input MJ 97.89864107978 0.7739228357 1.07164157 0.003814072491 0.1665252971 0.5521846688 -10.55152613 Use of secondary material (SM) Einsatz von Sekundärstoffen (SM) General reminder flow Input kg 0 0 0 0 0 0 0 Use of renewable secondary fuels (RSF) Erneuerbare Sekundärbrennstoffe (RSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of non renewable secondary fuels (NRSF) Nicht erneuerbare Sekundärbrennstoffe (NRSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of net fresh water (FW) Einsatz von Süßwasserressourcen (FW) General reminder flow Input m^3 0.0518259146435928 5.032382486E-05 0.00192091253 2.155216422E-08 9.409838324E-07 0.003702831056 -0.002511521964 Hazardous waste disposed (HWD) Gefährlicher Abfall zur Deponie (HWD) General reminder flow Output kg 7.38948962425071E-07 3.601591939E-08 7.471907997E-09 3.699446997E-13 1.615206611E-11 1.769689708E-09 -4.198599327E-09 Non hazardous waste disposed (NHWD) Entsorgter nicht gefährlicher Abfall (NHWD) General reminder flow Output kg 1.26887507485091 0.0001184398105 0.01735299729 3.899640619E-07 1.702612664E-05 0.1364908888 -0.004725645142 Radioactive waste disposed (RWD) Entsorgter radioaktiver Abfall (RWD) General reminder flow Output kg 0.0039582605034122 9.579122821E-07 4.486649749E-05 4.093764604E-09 1.787368668E-07 2.512269658E-05 -0.0007402472833 Components for re-use (CRU) Komponenten für die Wiederverwendung (CRU) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for recycling (MFR) Stoffe zum Recycling (MFR) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for energy recovery (MER) Stoffe für die Energierückgewinnung (MER) General reminder flow Output kg 0 0 0 0 0 0 0 Exported electrical energy (EEE) Exportierte elektrische Energie (EEE) General reminder flow Output MJ 0 0 1.244291052 0 0 0 0 Exported thermal energy (EET) Exportierte thermische Energie (EET) General reminder flow Output MJ 0 0 2.222169644 0 0 0 0 Global Warming Potential total (GWP-total) Globales Erwärmungspotenzial total (GWP-total) kg CO_(2)-Äq. 5.305325682175 0.05871720246 0.675979556 0.0002786595379 0.01237939877 0.9445000237 -0.6251110041 Global Warming Potential fossil fuels (GWP-fossil) Globales Erwärmungspotenzial fossil (GWP-fossil) kg CO_(2)-Äq. 5.358958440472 0.05807747519 0.5610055144 0.0002662982543 0.01183684636 0.4292688031 -0.6232704822 Global Warming Potential biogenic (GWP-biogenic) Globales Erwärmungspotenzial biogen (GWP-biogenic) kg CO_(2)-Äq. -0.0589167643022 0.0001695218598 0.1149168883 1.235488869E-05 0.0005422731999 0.5151962379 -0.001429919389 Global Warming Potential luluc (GWP-luluc) Globales Erwärmungspotenzial luluc (GWP-luluc) kg CO_(2)-Äq. 0.0052840060295699 0.000470205403 5.715335632E-05 6.394911664E-09 2.792066923E-07 3.498257312E-05 -0.0004106025676 Depletion potential of the stratospheric ozone layer (ODP) Abbau Potential der stratosphärischen Ozonschicht (ODP) kg CFC11-Äq. 1.99129196508E-13 6.979845494E-18 2.044262532E-15 2.836585201E-20 1.238474608E-18 3.022187215E-16 -6.106848783E-15 Acidification potential of land and water (AP) Versauerungspotenzial von Boden und Wasser (AP) mol H^(+)-Äq. 0.01610709559237 0.0001740460232 0.0002357578844 3.603487497E-06 3.734022818E-05 0.0005251343523 -0.0008449547303 Eutrophication potential aquatic freshwater (EP-freshwater) Eutrophierungspotenzial Süßwasser (EP-freshwater) kg PO_(4)-Äq. 9.351437238204E-06 1.765141825E-07 1.020263311E-07 5.750761277E-11 2.51082598E-09 1.035728106E-07 -7.560829715E-07 Eutrophication potential aquatic marine (EP-marine) Eutrophierungspotenzial Salzwasser (EP-marine) kg N-Äq. 0.003596080058279 7.75136912E-05 5.487754977E-05 1.634488904E-06 1.715462097E-05 0.000200798198 -0.0002213079585 Eutrophication potential terrestrial (EP-terrestrial) Eutrophierungspotenzial Land (EP-terrestrial) mol N-Äq. 0.03918693666791 0.0008681454276 0.000740010324 1.790057665E-05 0.0001888277157 0.002523199766 -0.002374863108 Formation potential of tropospheric ozone photochemical oxidants (POCP) Bildungspotential für troposphärisches Ozon (POCP) kg NMVOC-Äq. 0.01432235688938 0.0001531704875 0.009637001749 4.912404435E-06 3.387688189E-05 0.0005215223476 -0.0006381757127 Abiotic depletion potential for non fossil resources (ADPE) Potenzial für den abiotischen Abbau nicht fossiler Ressourcen (ADPE) kg Sb-Äq. 0.000108647130454835 4.163682369E-09 1.087307795E-06 8.058691308E-12 3.518485732E-10 4.615294113E-09 -9.798741474E-08 Abiotic depletion potential for fossil resources (ADPF) Potenzial für den abiotischen Abbau fossiler Brennstoffe (ADPF) MJ 97.87123975271 0.7731417236 1.07133459 0.003810342929 0.1663624615 0.5521597506 -10.5504855 Water use (WDP) Wassernutzung (WDP) m^(3) world-Äq. deprived 1.66567677432335 0.0005190876595 0.07648185214 5.26510258E-07 2.29878371E-05 0.1568875378 -0.06065727519 Incidence of disease due to PM emissions (PM) Auftreten von Krankheiten aufgrund von Feinstaubemissionen (PM) Disease incidence Human exposure efficiency relative to U235 (IR) Wirkung durch Exposition des Menschen mit U235 (IR) kBq U235-Äq. Comparative toxic unit for ecosystems (ETP-fw) Toxizitätsvergleichseinheit für Ökosysteme (ETP-fw) CTUe Comparative toxic unit for humans (carcinogenic) (HTP-c) Toxizitätsvergleichseinheit für Menschen (krebserregend) (HTP-c) CTUh Comparative toxic unit for humans (noncarcinogenic) (HTP-nc) Toxizitätsvergleichseinheit für Menschen (nicht krebserregend) (HTP-nc) CTUh Soil quality index (SQP) Bodenqualitätsindex (SQP) SQP