edbea38c-387d-4c0c-acfa-277b8fb861a6 RAVATHERM XPS (X) PLUS/ULTRA RAVATHERM XPS (X) PLUS/ULTRA Dämmstoffe Extrudiertes Polystyrol (XPS) XPS weiß 02 Building products Thermal insulation products Insulating materials made of foam plastics RAVATHERM(TM) XPS PLUS, XPS X PLUS and XPS X ULTRA extruded polystyrene foams (XPS) are thermoplastic insulation foams produced according to /EN 13164/ Building insulation, /EN 14307/ Equipment insulation. They are available in board shape with a density range from 25 to 50 kg/m3. The boards can be delivered in various compressive strength values from 150 to 700 kPa. To meet the need of various applications the boards are produced with different surfaces: with the extrusion skin, planed, grooved or with thermal embossing. These XPS boards are supplied with different edge treatments such as butt edge, ship lap and tongue and groove. The EPD is related to unfaced XPS products only; Heat lamination of several XPS layers is included. Additional product treatment is not considered. 100% Incineration 100% Verbrennung Scenario 2 Szenario 2 0 2023 2028 2023-01-04 RAVATHERM(TM) XPS PLUS, XPS X PLUS and XPS X ULTRA extruded polystyrene foams (XPS) are thermoplastic insulation foams produced according to /EN 13164/ Building insulation, /EN 14307/ Equipment insulation. They are available in board shape with a density range from 30 to 50 kg/m3. Technical data: Acoustic properties are not relevant for XPS foams. For fire performance these products usually achieve the fire classification Euroclass E according to /EN 13501-1/. Declared unit: The declared unit is 1 m³ of the XPS insulation product. The declared product reflects the average of three of Ravago's sites weighted by production volumes share: - Rheinmuenster (DE): 43.80 kg/m3 (60%) - King's Lynn (UK): 40.77 kg/m3 (24%) - Artix (FR): 36.36 kg/m3 (16%) The weighted average density of the product is 41.9 kg/m³. Corresponding conversion factors are listed in the table below. RAVATHERM(TM) XPS PLUS, XPS X PLUS und XPS X ULTRA extrudierte Polystyrolschaumstoffe (XPS) sind thermoplastische Dämmstoffe, die nach /EN 13164/ Gebäudeisolierung, /EN 14307/ Geräteisolierung hergestellt werden. Sie sind in Plattenform mit einer Dichte von 30 bis 50 kg/m3 erhältlich. The variety of the performance properties of RAVATHERM XPS PLUS, X PLUS and X ULTRA thermal insulation foams make them suitable for use in a large number of applications such as: perimeter insulation, inverted insulation for terrace roofs, insulation of pitched roofs, floor insulation including insulation of highly loaded industrial floors, insulation of thermal bridges for exterior walls, External Thermal Insulation Composite System (ETICS), insulation of cavity walls, agricultural building ceiling insulation, prefabricated elements e.g. building sandwich panels, insulation for building equipment and industrial installations (pipe sections, …). Durch die Vielfalt der Leistungseigenschaften von RAVATHERM XPS PLUS, X PLUS und X ULTRA Wärmedämmschaumstoffen eignen sich diese für eine Vielzahl von Anwendungen, wie z.B.: Perimeterdämmung, Umkehrdämmung für Terrassendächer, Dämmung von Steildächern, Bodendämmung einschließlich der Dämmung von hochbelasteten Industrieböden, Dämmung von Wärmebrücken für Außenwände, Wärmedämmverbundsystem (WDVS), Dämmung von Hohlwänden, Deckendämmung für landwirtschaftliche Gebäude, vorgefertigte Elemente wie z.B. z. B. Sandwichpaneele für Gebäude, Isolierung von Baugeräten und Industrieanlagen (Rohrleitungen, ...). EPD Insulating materials made of foam plastics.pdf average dataset GaBi Database (all versions) GaBi Database Edition 2021, CUP 2021.01 Scope: The data have been provided by the three ISO 14001 certified factories of Ravago Building Solutions producing these products in France, Germany and the UK for the year 2020. System boundary: Type of EPD according to EN 15804: "cradle to gate with options, modules C1–C4, and module D". The following modules are declared: A1–A3, C, D and additional modules: A4 + A5. Production - Modules A1-A3 The product stage includes: Raw material supply (A1) Transport to the manufacturer (A2): Transport is considered for up to 92% of the input raw materials Manufacturing (A3), including provision of all materials, products and energy, as well as waste processing up to the end-of waste state. Construction stage - Modules A4-A5 The construction process stage includes: Transport to the construction site (A4) Treatment of packaging material (A5) End-of-life stage– Modules C1-C4 and D The end-of-life stage includes Manual dismantling (C1) Transport to EoL (C2) Waste processing & disposal (C) with two 100 % scenarios (scenario 1: thermal treatment (C3 and D); scenario 2: landfill (C4)) Reuse, recovery or recycling potential (D) - beyond system boundary. RAVATHERM XPS (X) PLUS/ULTRA.pdf Institut Bauen und Umwelt e. V. DIN EN 15804+A2 ISO 14025 Ravago Building Solutions Germany GmbH Sphera Solutions GmbH 2023-01-04T13:50:20.313 ILCD Format EPD-Datenformaterweiterungen v1.2 EPD Data Format Extensions v1.2 00.02.000 Institut Bauen und Umwelt e. V. EPD-RAV-20220157-CBD1-EN Ravago Building Solutions Germany GmbH true Free of charge for all users and uses None Institut Bauen und Umwelt e. V. RAVATHERM XPS (X) PLUS/ULTRA (RAVATHERM XPS (X) PLUS/ULTRA) 1 Renewable primary energy as energy carrier (PERE) Erneuerbare Primärenergie als Energieträger (PERE) General reminder flow Input MJ 114.256704381493 2.42 0.0506 0 0.249 3.27 3.18 -233 -1.2 Renewable primary energy resources as material utilization (PERM) Erneuerbare Primärenergie zur stofflichen Nutzung (PERM) General reminder flow Input MJ 0 0 0 0 0 0 0 0 0 Total use of renewable primary energy resources (PERT) Total erneuerbare Primärenergie (PERT) General reminder flow Input MJ 114.256704381493 2.42 0.0506 0 0.249 3.27 3.18 -233 -1.2 Non renewable primary energy as energy carrier (PENRE) Nicht-erneuerbare Primärenergie als Energieträger (PENRE) General reminder flow Input MJ 2058.64121133171 43.4 31.1 0 4.48 1692.3 43.8 -1040 -20.5 Non renewable primary energy as material utilization (PENRM) Nicht-erneuerbare Primärenergie zur stofflichen Nutzung (PENRM) General reminder flow Input MJ 1706.9 0 -30.9 0 0 -1676 0 0 0 Total use of non renewable primary energy resources (PENRT) Total nicht erneuerbare Primärenergie (PENRT) General reminder flow Input MJ 3765.54121133175 43.4 0.256 0 4.48 16.3 43.8 -1040 -20.5 Use of secondary material (SM) Einsatz von Sekundärstoffen (SM) General reminder flow Input kg 0 0 0 0 0 0 0 0 0 Use of renewable secondary fuels (RSF) Erneuerbare Sekundärbrennstoffe (RSF) General reminder flow Input MJ 0 0 0 0 0 0 0 0 0 Use of non renewable secondary fuels (NRSF) Nicht erneuerbare Sekundärbrennstoffe (NRSF) General reminder flow Input MJ 0 0 0 0 0 0 0 0 0 Use of net fresh water (FW) Einsatz von Süßwasserressourcen (FW) General reminder flow Input m^3 0.632705100855559 0.00277 0.00452 0 0.000286 0.268 0.000403 -0.229 -0.00261 Hazardous waste disposed (HWD) Gefährlicher Abfall zur Deponie (HWD) General reminder flow Output kg 2.91769043358914E-07 2.19E-09 4.56E-11 0 2.26E-10 2.92E-09 7.87E-09 -2.32E-07 -3.07E-09 Non hazardous waste disposed (NHWD) Entsorgter nicht gefährlicher Abfall (NHWD) General reminder flow Output kg 0.987439154902914 0.00644 0.0083 0 0.000665 0.806 41.7 -0.483 -0.00433 Radioactive waste disposed (RWD) Entsorgter radioaktiver Abfall (RWD) General reminder flow Output kg 0.0789324628641647 5.25E-05 1.45E-05 0 5.41E-06 0.000924 0.000508 -0.0763 -0.00185 Components for re-use (CRU) Komponenten für die Wiederverwendung (CRU) General reminder flow Output kg 0 0 0 0 0 0 0 0 0 Materials for recycling (MFR) Stoffe zum Recycling (MFR) General reminder flow Output kg 0 0 0 0 0 0 0 0 0 Materials for energy recovery (MER) Stoffe für die Energierückgewinnung (MER) General reminder flow Output kg 0 0 0 0 0 0 0 0 0 Exported electrical energy (EEE) Exportierte elektrische Energie (EEE) General reminder flow Output MJ 0 0 4.47 0 0 254 0 0 0 Exported thermal energy (EET) Exportierte thermische Energie (EET) General reminder flow Output MJ 0 0 7.95 0 0 453 0 0 0 Global Warming Potential total (GWP-total) Globales Erwärmungspotenzial total (GWP-total) kg CO_(2)-Äq. 129.796021227348 3.26 2.1 0 0.336 140 2.97 -59.9 -1.09 Global Warming Potential fossil fuels (GWP-fossil) Globales Erwärmungspotenzial fossil (GWP-fossil) kg CO_(2)-Äq. 129.205295486143 3.23 2.1 0 0.334 140 3 -59.6 -1.09 Global Warming Potential biogenic (GWP-biogenic) Globales Erwärmungspotenzial biogen (GWP-biogenic) kg CO_(2)-Äq. 0.475040836726899 -0.00415 6.96E-05 0 -0.000428 0.00435 -0.0313 -0.295 -0.00129 Global Warming Potential luluc (GWP-luluc) Globales Erwärmungspotenzial luluc (GWP-luluc) kg CO_(2)-Äq. 0.0377549044778351 0.0267 1.12E-05 0 0.00275 0.000772 0.00251 -0.0409 -0.000113 Depletion potential of the stratospheric ozone layer (ODP) Abbau Potential der stratosphärischen Ozonschicht (ODP) kg CFC11-Äq. 4.04481912464762E-13 4.16E-16 1.57E-16 0 4.29E-17 1.02E-14 7.24E-15 -6.8E-13 -6.23E-15 Acidification potential of land and water (AP) Versauerungspotenzial von Boden und Wasser (AP) mol H^(+)-Äq. 0.261961717592618 0.0101 0.000209 0 0.00104 0.0124 0.00899 -0.078 -0.00121 Eutrophication potential aquatic freshwater (EP-freshwater) Eutrophierungspotenzial Süßwasser (EP-freshwater) kg PO_(4)-Äq. 0.000149051023806646 9.66E-06 2.1E-08 0 9.97E-07 1.38E-06 0.000554 -7.73E-05 -2.53E-07 Eutrophication potential aquatic marine (EP-marine) Eutrophierungspotenzial Salzwasser (EP-marine) kg N-Äq. 0.0597478197149693 0.00463 4.39E-05 0 0.000478 0.00274 0.00204 -0.0222 -0.000375 Eutrophication potential terrestrial (EP-terrestrial) Eutrophierungspotenzial Land (EP-terrestrial) mol N-Äq. 0.652295996873041 0.0519 0.00098 0 0.00535 0.0582 0.0224 -0.237 -0.00406 Formation potential of tropospheric ozone photochemical oxidants (POCP) Bildungspotential für troposphärisches Ozon (POCP) kg NMVOC-Äq. 0.697784429108499 0.00907 0.000131 0 0.000936 0.00806 0.00652 -0.0622 -0.00108 Abiotic depletion potential for non fossil resources (ADPE) Potenzial für den abiotischen Abbau nicht fossiler Ressourcen (ADPE) kg Sb-Äq. 1.29497187854511E-05 2.48E-07 2.37E-09 0 2.56E-08 1.54E-07 2.06E-07 -9.88E-06 -9.51E-08 Abiotic depletion potential for fossil resources (ADPF) Potenzial für den abiotischen Abbau fossiler Brennstoffe (ADPF) MJ 3762.75885695248 43.3 0.256 0 4.47 16.3 43.8 -1040 -20.5 Water use (WDP) Wassernutzung (WDP) m^(3) world-Äq. deprived 22.2557416588844 0.0283 0.193 0 0.00292 11.4 -0.037 -4.56 -0.0444 Incidence of disease due to PM emissions (PM) Auftreten von Krankheiten aufgrund von Feinstaubemissionen (PM) Disease incidence 2.15817957759634E-06 5.4E-08 1.24E-09 0 5.57E-09 7.31E-08 8.81E-08 -6.71E-07 -1.11E-08 Human exposure efficiency relative to U235 (IR) Wirkung durch Exposition des Menschen mit U235 (IR) kBq U235-Äq. 11.7744916423921 0.00751 0.00231 0 0.000775 0.146 0.0729 -12.5 -0.27 Comparative toxic unit for ecosystems (ETP-fw) Toxizitätsvergleichseinheit für Ökosysteme (ETP-fw) CTUe 2093.64373740952 31.3 0.116 0 3.23 7.83 41.6 -218 -3.58 Comparative toxic unit for humans (carcinogenic) (HTP-c) Toxizitätsvergleichseinheit für Menschen (krebserregend) (HTP-c) CTUh 4.23211519690436E-08 6.32E-10 1.34E-11 0 6.52E-11 7.75E-10 1.86E-09 -9.82E-09 -1.24E-10 Comparative toxic unit for humans (noncarcinogenic) (HTP-nc) Toxizitätsvergleichseinheit für Menschen (nicht krebserregend) (HTP-nc) CTUh 1.75805857035229E-06 3.7E-08 4.24E-10 0 3.82E-09 2.55E-08 1.56E-07 -3.88E-07 -6.01E-09 Soil quality index (SQP) Bodenqualitätsindex (SQP) SQP 80.7779858507118 14.9 0.0717 0 1.54 4.59 2.98 -159 -0.963