af0c67ea-0db9-4e63-835e-a234aaf22914 Products based on polyurethane or silane-modified polymer, group 1 Produkte auf Basis Polyurethan oder silanmodifiziertem Polymer, Gruppe 1 Beschichtungen Reaktionsharze Reaktionsharze auf PU-Basis 02 Building products Construction adhesives and coatings Reaction resin products This EPD comprises reactive products based on polyurethane (PU) or silane-modified polymer (SMP) with a volatile organic copound (VOC) content ≤1 % (VOC definition according to Decopaint Directive) and a castor oil/-derivatives content ≤ 10%. The one- or two-component reactive PU products are manufactured using polyols and isocyanates. Reactive products based on SMP polymers are usually manufactured as a one-component system from polyols and alkoxysilane in a preliminary stage. The aqueous systems consist of (a) dispersion and are crosslinked by a dispersible isocyanate. The products fulfil manifold, often specific, functions in the construction, furnishing and repair of buildings. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). 0 2022 2027 2022-06-01 This EPD comprises reactive products based on polyurethane (PU) or silane-modified polymer (SMP) with a volatile organic copound (VOC) content ≤1 % (VOC definition according to Decopaint Directive) and a castor oil/-derivatives content ≤ 10%. The one- or two-component reactive PU products are manufactured using polyols and isocyanates. Reactive products based on SMP polymers are usually manufactured as a one-component system from polyols and alkoxysilane in a preliminary stage. The aqueous systems consist of (a) dispersion and are crosslinked by a dispersible isocyanate. The products fulfil manifold, often specific, functions in the construction, furnishing and repair of buildings. According to the Model EPD system (IBU) and the guideline and the substance list (available for members of the trade associations FEICA, EFCC, IVK and DBC), the environmental impacts of the substances are condensed to a single score; the single score of a formulation is calculated based on the single score of the substances. The products are grouped according to their single score (group 1 to 6), the formulation displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). Technical data: The density of the products is between 0,85 and 1,8 g/cm, other relevant technical data can be found in the manufacturers technical documentation. Module 1: Reactive products as adhesive for parquet and floor coverings The minimum requirements of EN ISO 17178 and EN ISO 22636 must be maintained. Module 2: Reactive products for protecting and repairing concrete structures 2.1 The requirements on essential characteristics for all intended uses in accordance with EN 1504-2, Tables 1 and 5 must be maintained. These are: - Permeability to CO2 (EN 1062-6) - Water vapour permeability (EN ISO 7783-1/-2) - Capillary absorption and permeability to water (EN 1062-3) - Adhesive strength by pull-off test (EN 1542) 2.2 Essential characteristics for all intended uses in accordance with EN 1504-4, Tables 3.1 and 3.2 (manufacturers declaration of performance) 2.3 Requirements on essential characteristics for all intended uses in accordance with EN 1504-5, Table 3: - Injectability (EN 1771) - Viscosity (EN ISO 3219) Further essential characteristics in accordance with the manufacturers technical documentation/declaration of performance Module 3: Liquid-applied roof waterproofing kits The minimum requirements of EAD 030350-00-0402 Liquid-applied roof waterproofing kits must be maintained. The essential characteristics are to be specified in accordance with the European Technical Assessment (ETA, specification no.). Module 4: Reactive products for liquid-applied bridge deck waterproofing kits The minimum requirements of ETAG 033 Liquid-applied bridge deck waterproofing kits must be maintained. The essential characteristics are to be specified in accordance with the European Technical Assessment (ETA, specification no.). Module 5: Screed material, floor screeds and decorative floors The requirements on essential characteristics according to EN 13813 Screed material and floor screeds – Screed materials – Properties and requirements/ must be maintained. For synthetic resin screeds, these are: - Bond strength (EN 13892-8) - Reaction to fire (EN 13501-1) Further essential characteristics in accordance with the manufacturers technical documentation/declaration of performance Module 6: Reactive products as an adhesive for tiles The requirements on essential characteristics according to EN12004, must be maintained. These are: -Tensile adhesion strength after dry storage (EN 12004-2) -Tensile adhesion strength after water immersion (EN 12004-2) -Tensile adhesion strength after heat ageing (EN 12004-2) -Tensile adhesion strength after freeze/thaw cycles (EN 12004-2) -Open time: Tensile strength (EN 12004-2) Further essential characteristics in accordance with the manufacturers technical documentation Module 7: Adhesives and sealants Performance characteristics in accordance with the manufacturers technical documentation / declaration of performance Module 8: Reactive products for watertight covering kits The minimum requirements of EAD 030352-00-0503 Liquid applied watertight covering kits for wet room floors and/or walls must be maintained. The essential characteristics are to be specified in accordance with the European Technical Assessment (ETA, specification no.). Module 9: Reactive products for liquid-applied waterproofings The minimum requirements of the test principles regarding the issuing of general building authority test certificates for liquid-applied products for waterproofing of buildings (PG-FLK) must be maintained. The characteristics for the proof of usability are to be specified in accordance with the test principles for granting general building authority test certificates for liquid applied polymer products for waterproofing buildings Module 10: Reactive products for waterproofing and/or for pre-treating mineral substrates Declared unit: This EPD refers to the declared unit of 1 kg of product based on polyurethane or silane-modified polymer, group 1; applied into the building with a density of 0.85 - 1.8 g/cm in accordance with the IBU PCR part B for reaction resin products. The results of the Life Cycle Assessment provided in this declaration have been selected from the product with the highest environmental impact (worst-case scenario). Depending on the application, a corresponding conversion factor such as the density to convert volumetric use to mass must be taken into consideration. The Declaration type is according to EN 15804: Cradle to gate with options, modules C1–C3, and module D (A1–A3, C, D) and additional modules. Diese EPD umfasst reaktive Produkte auf Basis von Polyurethan (PU) oder silanmodifiziertem Polymer (SMP) mit einem Gehalt an flüchtigen organischen Verbindungen (VOC) ≤1 % (VOC-Definition gemäß Decopaint-Richtlinie) und einem Gehalt an Rizinusöl/-derivaten ≤ 10 %. Die ein- oder zweikomponentigen reaktiven PU-Produkte werden unter Verwendung von Polyolen und Isocyanaten hergestellt. Reaktive Produkte auf Basis von SMP-Polymeren werden in der Regel als Einkomponentensystem aus Polyolen und Alkoxysilan in einer Vorstufe hergestellt. Die wässrigen Systeme bestehen aus (einer) Dispersion und werden durch ein dispergierbares Isocyanat vernetzt. Die Produkte erfüllen vielfältige, oft spezifische Funktionen beim Bau, der Einrichtung und der Instandsetzung von Gebäuden. Nach dem Modell-EPD-System (IBU) und dem Leitfaden und der Stoffliste (erhältlich für Mitglieder der Fachverbände FEICA, EFCC, IVK und DBC) werden die Umweltauswirkungen der Stoffe zu einem Single Score verdichtet; der Single Score einer Formulierung wird auf der Basis des Single Scores der Stoffe berechnet. Die Produkte werden entsprechend ihrer Einzelpunktzahl in Gruppen eingeteilt (Gruppe 1 bis 6), wobei die Formulierung mit den höchsten Umweltauswirkungen als repräsentatives Produkt für die Berechnung der Ökobilanzergebnisse verwendet wurde (Worst-Case-Ansatz). Products based on polyurethane or silane-modified polymer, group 1, are used for the following applications: Module 1: Adhesives for parquet and floor coverings Parquet adhesives in accordance with EN ISO 17178 for wooden and parquet floors and flooring adhesives in accordance with EN ISO 22636 for floor coverings Module 2: Reactive products for protecting and repairing concrete structures Products for increasing the durability of concrete and reinforced concrete structures as well as for new concrete and for maintenance and repair work (requirements 2.1), products for structural bonding of strengthening materials to an existing concrete structure (requirements 2.2) and products for concrete injection for filling cracks, voids and interstices in concrete (requirements 2.3) Module 3: Liquid-applied roof waterproofing kits Reactive products for waterproofing roof constructions which are applied on site Module 4: Reactive products for liquid-applied bridge deck waterproofing kits Products for liquid-applied waterproofing for use on concrete bridge decks Module 5: Screed material, floor screeds and decorative floors Products for screed/synthetic resin screed for use in floor constructions Module 6: Reactive products as an adhesive for tiles Tile adhesives for internal and external tile installations on walls, floors and ceilings Module 7: Adhesives and sealants Reactive products for use as: · Structural and repair adhesives · Surface and joint sealants Applications in accordance with the manufacturers technical documentation/declaration of performance Module 8: Reactive products for watertight covering kits Products for waterproofing floors and/or walls in wet rooms inside buildings Module 9: Reactive products for liquid-applied waterproofing Liquid applied products for waterproofing of buildings Module 10: Reactive products for waterproofing and/or for pre-treating mineral substrates Applications in accordance with the manufacturers technical documentation Module 11: Liquid-applied waterproofing membranes for use beneath ceramic tiling Module 12: One-component foam (OCF) One component foam in a can is a one-component, self-expanding, ready to use polyurethane foam used for various construction applications. It consists of a low viscous semi-fluid in a can that leaves the can as a froth and immediately forms a polyurethane foam. 12.1 Window & External Door Sealing & Insulation: Installing mechanically fixed external windows and doors with an OCF, as part of a system including sealants and tapes 12.2 Door Installation & Fixation: Fixing interior doors with an OCF 12.3 General Gap Filling: Filling of regularly and irregularly shaped spaces between at least two surfaces made of typical building materials with a one-component foam (OCF) Module 13: Sealants for glazing Two-component reactive sealants are to be used as the second barrier of the structural hermetic seal in insulating glass units. Module 14: Bonded glazing sealants One- and two-component reactive sealants are used for the bonding of insulating glass units in the window frame. Produkte auf Basis von Polyurethan oder silanmodifiziertem Polymer, Gruppe 1, werden für folgende Anwendungen eingesetzt: Modul 1: Klebstoffe für Parkett und Bodenbeläge Parkettklebstoffe nach EN ISO 17178 für Holz- und Parkettböden und Bodenbelagsklebstoffe nach EN ISO 22636 für Bodenbeläge Modul 2: Reaktive Produkte für den Schutz und die Instandsetzung von Betonbauwerken Produkte zur Erhöhung der Dauerhaftigkeit von Beton- und Stahlbetonbauwerken sowie für neuen Beton und für Instandhaltungs- und Instandsetzungsarbeiten (Anforderungen 2.1), Produkte zum strukturellen Verbinden von Verstärkungsmaterialien mit einem bestehenden Betonbauwerk (Anforderungen 2.2) und Produkte zur Betoninjektion zum Füllen von Rissen, Hohlräumen und Zwischenräumen im Beton (Anforderungen 2.3) Modul 3: Bausätze für flüssig aufzubringende Dachabdichtungen Reaktive Produkte für die Abdichtung von Dachkonstruktionen, die vor Ort aufgebracht werden Modul 4: Reaktive Produkte für flüssig aufzubringende Abdichtungen von Brückenfahrbahnen Produkte für flüssig aufzubringende Abdichtungen zur Verwendung auf Betonbrückenbelägen Modul 5: Estrichmaterial, Estriche und dekorative Böden Produkte für Estrich/Kunstharzestrich zur Verwendung in Fußbodenkonstruktionen Modul 6: Reaktive Produkte als Klebstoff für Fliesen Fliesenkleber für die Innen- und Außenverlegung von Fliesen an Wänden, Böden und Decken Modul 7: Klebstoffe und Dichtstoffe Reaktive Produkte zur Verwendung als: - Konstruktions- und Reparaturklebstoffe - Flächen- und Fugendichtstoffe Anwendungen in Übereinstimmung mit der technischen Dokumentation/Leistungserklärung des Herstellers Modul 8: Reaktive Produkte für wasserundurchlässige Abdeckungssätze Produkte für die Abdichtung von Böden und/oder Wänden in Feuchträumen innerhalb von Gebäuden Modul 9: Reaktive Produkte für flüssig aufzubringende Abdichtungen Flüssig aufzubringende Produkte für die Abdichtung von Gebäuden Modul 10: Reaktive Produkte für Abdichtungen und/oder zur Vorbehandlung von mineralischen Untergründen Anwendungen gemäß den technischen Unterlagen des Herstellers Modul 11: Flüssig aufzubringende Abdichtungsbahnen für die Verwendung unter keramischen Fliesen und Platten Modul 12: Einkomponentiger Schaum (OCF) Einkomponentenschaum in der Dose ist ein einkomponentiger, selbstexpandierender, gebrauchsfertiger Polyurethanschaum, der für verschiedene Bauanwendungen. Er besteht aus einer niedrigviskosen Halbflüssigkeit in einer Dose, die die Dose als Schaum verlässt und sofort einen Polyurethanschaum bildet. 12.1 Abdichtung und Isolierung von Fenstern und Außentüren: Der Einbau von mechanisch befestigten Außenfenstern und Türen mit einem OCF, als Teil eines Systems mit Dichtstoffe und Bänder 12.2 Einbau und Befestigung von Türen: Befestigung von Innentüren mit einer OCF 12.3 Allgemeines Ausfüllen von Lücken: Ausfüllen von regelmäßig und unregelmäßig geformten Zwischenräumen zwischen mindestens zwei Oberflächen aus typischen Baumaterialien mit einem Einkomponentenschaum (OCF) Modul 13: Dichtstoffe für Verglasungen Zweikomponenten-Reaktivdichtstoffe sind als zweite Barriere der strukturellen hermetischen Abdichtung in Isolierglaseinheiten zu verwenden. Modul 14: Verglasungsdichtstoffe im Verbund Ein- und Zweikomponenten-Reaktivdichtstoffe werden für die Verklebung von Isolierglaseinheiten im Fensterrahmen verwendet. EPD Reaction resin products.pdf template dataset GaBi Database (all versions) GaBi database SP40 2020 Scope: This verified EPD entitles the holder to bear the symbol of the Institut Bauen und Umwelt e.V. It exclusively applies for products produced in Europe and for a period of five years from the date of issue. This EPD may be used by members of DBC, EFCC, FEICA and IVK and their members provided it has been proven that the respective product can be represented by this EPD. For this purpose a guideline is available at the secretariats of the four associations. The members of the associations are listed on the respective websites. System boundary: Modules A1, A2 and A3 are taken into consideration in the LCA: - A1 Production of preliminary products - A2 Transport to the plant - A3 Production incl. provision of energy, production of packaging as well as auxiliaries and consumables and waste treatment - A4 Transport to site - A5 Installation, product applied into the building during A5 phase operations and packaging disposal. This stage considers VOC emissions during the installation phase. The declared product does not contain substances in the formulation that directly emit (as) VOC, but VOCs are generated by a chemical reaction that are occurring during this phase. The end of life for the packaging material considered is described below: -Incineration, for materials like plastic and wood. -Landfill, for inert material like metals (where used). -C1-C2-C3-D The building deconstruction (demolition process) takes place in the C1 module which considers energy production and consumption in terms of diesel and all the emissions connected with the fuel-burning process to run the machines. After the demolition, the product is transported to the end-of-life processing (C2 module) where all the impacts related to the transport processes are considered. For precautionary principle and as a worst-case scenario, thermal treatment is the only end-of-life scenario considered. This is modelled by the incineration process (module C3) where the product ends its life cycle. Module D accounts for potential benefits that are beyond the defined system boundaries. Credits are generated during the incineration of wastes and related electricity produced that are occurring in the A5 module. Products based on polyurethane or silane-modified polymer, group 1.pdf Institut Bauen und Umwelt e. V. DIN EN 15804+A2 ISO 14025 FEICA - Association of the European Adhesive and Sealant Industry Sphera Solutions GmbH 2022-06-01T00:00:00 ILCD Format EPD-Datenformaterweiterungen v1.2 EPD Data Format Extensions v1.2 00.05.000 Reactive resins based on polyurethane or SMP, filled or aqueous, solvent-free Institut Bauen und Umwelt e. V. EPD-FEI-20220021-IBG2-EN FEICA - Association of the European Adhesive and Sealant Industry true Free of charge for all users and uses None Institut Bauen und Umwelt e. V. Product based on polyurethane or silane modified polymer, group 1 (Produkte auf Basis Polyurethan oder silanmodifiziertem Polymer, Gruppe 1) 1 Renewable primary energy as energy carrier (PERE) Erneuerbare Primärenergie als Energieträger (PERE) General reminder flow Input MJ 6.67429 0.039 0.665 1.2E-05 0.000525 0.0823 -3.52 Renewable primary energy resources as material utilization (PERM) Erneuerbare Primärenergie zur stofflichen Nutzung (PERM) General reminder flow Input MJ 0.585 0 -0.585 0 0 0 0 Total use of renewable primary energy resources (PERT) Total erneuerbare Primärenergie (PERT) General reminder flow Input MJ 7.26429 0.039 0.0799 1.2E-05 0.000525 0.0823 -3.52 Non renewable primary energy as energy carrier (PENRE) Nicht-erneuerbare Primärenergie als Energieträger (PENRE) General reminder flow Input MJ 83.26 0.695 1.63 0.00381 0.167 22.1 -16.1 Non renewable primary energy as material utilization (PENRM) Nicht-erneuerbare Primärenergie zur stofflichen Nutzung (PENRM) General reminder flow Input MJ 22 0 -0.52 0 0 -21.5 0 Total use of non renewable primary energy resources (PENRT) Total nicht erneuerbare Primärenergie (PENRT) General reminder flow Input MJ 105.32 0.695 1.11 0.00381 0.167 0.587 -16.1 Use of secondary material (SM) Einsatz von Sekundärstoffen (SM) General reminder flow Input kg 0 0 0 0 0 0 0 Use of renewable secondary fuels (RSF) Erneuerbare Sekundärbrennstoffe (RSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of non renewable secondary fuels (NRSF) Nicht erneuerbare Sekundärbrennstoffe (NRSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of net fresh water (FW) Einsatz von Süßwasserressourcen (FW) General reminder flow Input m^3 0.04029569 4.52E-05 0.000722 2.16E-08 9.41E-07 0.00511 -0.00408 Hazardous waste disposed (HWD) Gefährlicher Abfall zur Deponie (HWD) General reminder flow Output kg 1.1203242E-05 3.23E-08 1.12E-07 3.7E-13 1.62E-11 3.34E-10 -6.41E-09 Non hazardous waste disposed (NHWD) Entsorgter nicht gefährlicher Abfall (NHWD) General reminder flow Output kg 0.166149 0.000106 0.0475 3.9E-07 1.7E-05 0.0111 -0.00744 Radioactive waste disposed (RWD) Entsorgter radioaktiver Abfall (RWD) General reminder flow Output kg 0.00234146 8.6E-07 2.54E-05 4.09E-09 1.79E-07 2.37E-05 -0.0012 Components for re-use (CRU) Komponenten für die Wiederverwendung (CRU) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for recycling (MFR) Stoffe zum Recycling (MFR) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for energy recovery (MER) Stoffe für die Energierückgewinnung (MER) General reminder flow Output kg 0 0 0 0 0 0 0 Exported electrical energy (EEE) Exportierte elektrische Energie (EEE) General reminder flow Output MJ 0 0 0.212 0 0 0 0 Exported thermal energy (EET) Exportierte thermische Energie (EET) General reminder flow Output MJ 0 0 0.386 0 0 0 0 Global Warming Potential total (GWP-total) Globales Erwärmungspotenzial total (GWP-total) kg CO_(2) eq 4.785 0.0527 0.18 0.000279 0.0124 2.21 -0.95 Global Warming Potential fossil fuels (GWP-fossil) Globales Erwärmungspotenzial fossil (GWP-fossil) kg CO_(2) eq 4.8085 0.0522 0.0938 0.000266 0.0118 2.21 -0.947 Global Warming Potential biogenic (GWP-biogenic) Globales Erwärmungspotenzial biogen (GWP-biogenic) kg CO_(2) eq -0.03567 0.000152 0.0862 1.24E-05 0.000542 8.82E-05 -0.00223 Global Warming Potential luluc (GWP-luluc) Globales Erwärmungspotenzial luluc (GWP-luluc) kg CO_(2) eq 0.00449628 0.000422 4.84E-05 6.39E-09 2.79E-07 2.08E-05 -0.000666 Depletion potential of the stratospheric ozone layer (ODP) Abbau Potential der stratosphärischen Ozonschicht (ODP) kg CFC11 eq 6.7600014501E-09 6.27E-18 6.76E-11 2.84E-20 1.24E-18 2.62E-16 -9.93E-15 Acidification potential of land and water (AP) Versauerungspotenzial von Boden und Wasser (AP) mol H^(+) eq 0.010152 0.000156 0.000129 3.6E-06 3.73E-05 0.00131 -0.00133 Eutrophication potential aquatic freshwater (EP-freshwater) Eutrophierungspotenzial Süßwasser (EP-freshwater) kg P eq 1.93475E-05 1.59E-07 1.98E-07 5.75E-11 2.51E-09 4.4E-08 -1.23E-06 Eutrophication potential aquatic marine (EP-marine) Eutrophierungspotenzial Salzwasser (EP-marine) kg N eq 0.002668 6.96E-05 3.5E-05 1.63E-06 1.72E-05 0.000631 -0.000343 Eutrophication potential terrestrial (EP-terrestrial) Eutrophierungspotenzial Land (EP-terrestrial) mol N eq 0.0293 0.00078 0.000411 1.79E-05 0.000189 0.00726 -0.00368 Formation potential of tropospheric ozone photochemical oxidants (POCP) Bildungspotential für troposphärisches Ozon (POCP) kg NMVOC eq 0.009473 0.000138 0.0072 4.91E-06 3.39E-05 0.00162 -0.000987 Abiotic depletion potential for non fossil resources (ADPE) Potenzial für den abiotischen Abbau nicht fossiler Ressourcen (ADPE) kg Sb eq 8.17988E-06 3.74E-09 8.22E-08 8.06E-12 3.52E-10 4.65E-09 -1.56E-07 Abiotic depletion potential for fossil resources (ADPF) Potenzial für den abiotischen Abbau fossiler Brennstoffe (ADPF) MJ 105.32 0.694 1.11 0.00381 0.166 0.587 -16.1 Water use (WDP) Wassernutzung (WDP) m^(3) world eq deprived 1.337588 0.000466 0.0269 5.27E-07 2.3E-05 0.217 -0.0986 Incidence of disease due to PM emissions (PM) Auftreten von Krankheiten aufgrund von Feinstaubemissionen (PM) Disease incidence Human exposure efficiency relative to U235 (IR) Wirkung durch Exposition des Menschen mit U235 (IR) kBq U235 eq Comparative toxic unit for ecosystems (ETP-fw) Toxizitätsvergleichseinheit für Ökosysteme (ETP-fw) CTUe Comparative toxic unit for humans (carcinogenic) (HTP-c) Toxizitätsvergleichseinheit für Menschen (krebserregend) (HTP-c) CTUh Comparative toxic unit for humans (noncarcinogenic) (HTP-nc) Toxizitätsvergleichseinheit für Menschen (nicht krebserregend) (HTP-nc) CTUh Soil quality index (SQP) Bodenqualitätsindex (SQP) SQP