a067252c-c984-4214-97a7-8c4ddc27c7bc Products based on epoxy-resin, group 1 Produkte auf Basis Epoxidharz, Gruppe 1 Beschichtungen Reaktionsharze Reaktionsharze auf Epoxidharzbasis 02 Building products Construction adhesives and coatings Reaction resin products This EPD comprises reactive products based on epoxy (EP) resin and hardening agent; the Volatile Organic Content (VOC) content is ≤1 % (VOC definition according to Decopaint Directive). The aqueous systems can be formulated as aqueous dispersions on the resin or hardening agent side. They comply with multiple, often specific functions in the construction, furnishing and repair of structures. The product displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). 0 This EPD comprises reactive products based on epoxy (EP) resin and hardening agent; the Volatile Organic Compound (VOC) content is ≤1 % (VOC definition according to Decopaint Directive). The aqueous systems can be formulated as aqueous dispersions on the resin or hardening agent side. They comply with multiple, often specific functions in the construction, furnishing and repair of structures. According to the Model EPD system (IBU) and the guideline and the substance list (available for members of the trade associations FEICA, EFCC, IVK and DBC), the environmental impacts of the substances are condensed to a single score; the single score of a formulation is calculated based on the single score of the substances. The products are grouped according to their single score (group 1 to 5), the formulation displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). Technical data: The density of the products is between 1,0 and 2,5 g/cm³, other relevant technical data can be found in the manufacturer’s technical documentation. Module 1: Reactive products for protecting and repairing concrete structures 1.1 The requirements on essential characteristics for all intended uses in accordance with EN 1504-2, Tables 1 and 5 must be maintained. These are: - Permeability to CO2 (EN 1062-6) - Water vapour permeability (EN ISO 7783-1/-2) - Capillary absorption and permeability to water (EN 1062-3) - Adhesive strength by pull-off test (EN 1542) 1.2 The requirements on essential characteristics for all intended uses in accordance with EN 1504-3, Tables 1 and 3, must be maintained. These are - Compressive strength (EN 12190) - Chloride content (EN 1015-17) - Adhesive strength by pull-off test (EN 1542) 1.3 Essential characteristics for all intended uses in accordance with EN 1504-4, Tables 3.1 and 3.2 (manufacturer's declaration of performance) 1.4 Requirements on essential characteristics for all intended uses in accordance with EN 1504-5, Table 3: - Injectability (EN 1771) - Viscosity (EN ISO 3219) Further essential characteristics in accordance with the manufacturer's technical documentation/declaration of performance Module 2: Liquid-applied roof waterproofing kits The minimum requirements of EAD 030350-00-0402 'Liquid-applied roof waterproofing kits' must be maintained. The essential characteristics are to be specified in accordance with the European technical assessment (ETA, specification no.). Module 3: Reactive products for liquid-applied bridge deck waterproofing kits The minimum requirements of ETAG 033 'Liquid-applied bridge deck waterproofing kits' must be maintained. The essential characteristics are to be specified in accordance with the European technical assessment (ETA, specification no.). Module 4: Reactive products for watertight covering kits The minimum requirements of EAD 030352-00-0503 'Liquid applied watertight covering kits for wet room floors and/or walls' must be maintained. The essential characteristics are to be specified in accordance with the European Technical Assessment (ETA, specification no.). Module 5: Reactive products for liquid-applied waterproofings The minimum requirements of the 'Test principles regarding the issuing of general building authority inspection test certificates for liquid applied products for waterproofing of buildings' (PG-FLK) must be maintained. The characteristics for the proof of usability are to be specified in accordance with the 'Test principles for granting general building authority test certificates for liquid applied polymer products for waterproofing buildings'. Module 6: Screed material, floor screeds and decorative floors The requirements on essential characteristics according to EN 13813 'Screed material and floor screeds – Screed materials – Properties and requirements' must be maintained. For synthetic resin screeds, these are: - Bond strength (EN 13892-8) - Reaction to fire (EN 13501-1) Further essential characteristics in accordance with the manufacturer's technical documentation/declaration of performance Module 7: Reactive products for waterproofing and/or for pre-treating mineral substrates Essential characteristics in accordance with the manufacturer's technical documentation Declared unit: This EPD refers to the declared unit of 1 kg of product based on epoxy-resin, group 1; applied into the building with a density of 1-2.50 g/cm³ in accordance with the IBU PCR part B for reaction resin products. The results of the Life Cycle Assessment provided in this declaration have been selected from the product with the highest environmental impact (worst-case scenario). Depending on the application, a corresponding conversion factor such as the density to convert volumetric use to mass must be taken into consideration. The Declaration type is according to EN 15804: Cradle to gate with options, modules C1–C3, and module D (A1–A3, C, D) and additional modules (A4 - A5). Diese EPD umfasst reaktive Produkte auf Basis von Epoxidharz (EP) und Härter; der Gehalt an flüchtigen organischen Verbindungen (VOC) ist ≤1 % (VOC-Definition gemäß Decopaint-Richtlinie). Die wässrigen Systeme können als wässrige Dispersionen auf der Harz- oder Härterseite formuliert werden. Sie erfüllen vielfältige, oft spezifische Funktionen beim Bau, der Einrichtung und der Instandsetzung von Bauwerken. Nach dem Modell-EPD-System (IBU) und dem Leitfaden und der Stoffliste (erhältlich für Mitglieder der Fachverbände FEICA, EFCC, IVK und DBC) werden die Umweltauswirkungen der Stoffe zu einem Single Score verdichtet; der Single Score einer Formulierung wird aus dem Single Score der Stoffe berechnet. Die Produkte werden entsprechend ihrer Einzelpunktzahl in Gruppen eingeteilt (Gruppe 1 bis 5), wobei die Formulierung mit den höchsten Umweltauswirkungen als repräsentatives Produkt für die Berechnung der Ökobilanzergebnisse verwendet wurde (Worst-Case-Ansatz). Products based on epoxy-resins are used for the following applications: Module 1: Reactive products for protecting and repairing concrete structures Products for increasing the durability of concrete and reinforced concrete structures as well as for new concrete and for maintenance and repair work (requirements 1.1), products used to restore and/or to replace defective concrete and to protect reinforce-ment, necessary to extend the service life of a concrete structure exhibiting deterioration (require-ments 1.2), products for structural bonding of strengthening materials to an existing concrete structure (requirements 1.3) and products for concrete injection for filling cracks, voids and interstices in concrete (requirements 1.4) Module 2: Liquid-applied roof waterproofing kits Reactive products for waterproofing roof constructions which are applied on site Module 3: Reactive products for liquid-applied bridge deck waterproofing kits Products for liquid-applied waterproofing for use on concrete bridge decks Module 4: Reactive products for watertight covering kits Products for waterproofing floors and/or walls in wet rooms inside buildings Module 5: Reactive products for liquid-applied waterproofings Liquid applied products for waterproofing of buildings Module 6: Screed material, floor screeds and decorative floors Products for screed/synthetic resin screed and decorative floors for use in floor constructions Module 7: Reactive products for waterproofing and/or for pre-treating mineral substrates Products to protect mineral substrates from the ingress of water Products based on epoxy-resins are used for the following applications: Module 1: Reactive products for protecting and repairing concrete structures Products for increasing the durability of concrete and reinforced concrete structures as well as for new concrete and for maintenance and repair work (requirements 1.1), products used to restore and/or to replace defective concrete and to protect reinforce-ment, necessary to extend the service life of a concrete structure exhibiting deterioration (require-ments 1.2), products for structural bonding of strengthening materials to an existing concrete structure (requirements 1.3) and products for concrete injection for filling cracks, voids and interstices in concrete (requirements 1.4) Module 2: Liquid-applied roof waterproofing kits Reactive products for waterproofing roof constructions which are applied on site Module 3: Reactive products for liquid-applied bridge deck waterproofing kits Products for liquid-applied waterproofing for use on concrete bridge decks Module 4: Reactive products for watertight covering kits Products for waterproofing floors and/or walls in wet rooms inside buildings Module 5: Reactive products for liquid-applied waterproofings Liquid applied products for waterproofing of buildings Module 6: Screed material, floor screeds and decorative floors Products for screed/synthetic resin screed and decorative floors for use in floor constructions Module 7: Reactive products for waterproofing and/or for pre-treating mineral substrates Products to protect mineral substrates from the ingress of water EPD Reaction resin products.pdf template dataset GaBi Database (all versions) GaBi database SP40 2020 Scope: This verified EPD entitles the holder to bear the symbol of the Institut Bauen und Umwelt e.V. It exclusively applies to products produced in Europe and for a period of five years from the date of issue. This EPD may be used by members of DBC, EFCC, FEICA and IVK and their members provided it has been proven that the respective product can be represented by this EPD. For this purpose, a guideline is available at the secretariats of the four associations. The members of the associations are listed on their respective websites. System boundary: Modules A1, A2 and A3 are taken into consideration in the LCA: - A1 Production of preliminary products - A2 Transport to the plant - A3 Production incl. provision of energy, production of packaging as well as auxiliaries and consumables and waste treatment - A4 Transport to site - A5 Installation, product applied into the building during A5 phase operations and packaging disposal. The end of life for the packaging material considered is described below: -Incineration, for materials like wood. -Landfill, for inert material like metals (where used). -C1-C2-C3-D The building deconstruction (demolition process) takes place in the C1 module which considers energy production and consumption in terms of diesel and all the emissions connected with the fuel-burning process to run the machines. After the demolition, the product is transported to the end-of-life processing (C2 module) where all the impacts related to the transport processes are considered. For precautionary principle and as a worst-case scenario, thermal treatment is the only end of life scenario considered. This is modelled by the incineration process (module C3) where the product ends its life cycle. Module D accounts for potential benefits that are beyond the defined system boundaries. Credits are generated during the incineration of wastes and related electricity produced that are occurring in the A5 module. Products based on epoxy-resin, group 1 .pdf Institut Bauen und Umwelt e. V. DIN EN 15804+A2 ISO 14025 FEICA - Association of the European Adhesive and Sealant Industry Sphera Solutions GmbH 2022-08-29T12:13:06.126 ILCD Format EPD-Datenformaterweiterungen v1.2 EPD Data Format Extensions v1.2 00.02.000 Institut Bauen und Umwelt e. V. EPD-DBC-20220174-IBF1-EN FEICA - Association of the European Adhesive and Sealant Industry true Free of charge for all users and uses None Institut Bauen und Umwelt e. V. Product based on epoxy-resin, group 1 (of product based on epoxy-resin, group 1) 1 Renewable primary energy as energy carrier (PERE) Erneuerbare Primärenergie als Energieträger (PERE) General reminder flow Input MJ 8.975693655204 0.03962852456 1.06514567 1.177429409E-05 0.0005140746081 0.7976603846 -1.233430159 Renewable primary energy resources as material utilization (PERM) Erneuerbare Primärenergie zur stofflichen Nutzung (PERM) General reminder flow Input MJ 1.656312975 0 -0.9504062595 0 0 -0.7059067155 0 Total use of renewable primary energy resources (PERT) Total erneuerbare Primärenergie (PERT) General reminder flow Input MJ 10.632006630104 0.03962852456 0.11473941 1.177429409E-05 0.0005140746081 0.0917536691 -1.233430159 Non renewable primary energy as energy carrier (PENRE) Nicht-erneuerbare Primärenergie als Energieträger (PENRE) General reminder flow Input MJ 59.344748312 0.7056912714 1.396023988 0.003737791041 0.1631947911 24.61098142 -6.290562074 Non renewable primary energy as material utilization (PENRM) Nicht-erneuerbare Primärenergie zur stofflichen Nutzung (PENRM) General reminder flow Input MJ 24.56106168 0 -0.4912212337 0 0 -24.06984045 0 Total use of non renewable primary energy resources (PENRT) Total nicht erneuerbare Primärenergie (PENRT) General reminder flow Input MJ 83.905809997 0.7056912714 0.9048027542 0.003737791041 0.1631947911 0.5411409754 -6.290562074 Use of secondary material (SM) Einsatz von Sekundärstoffen (SM) General reminder flow Input kg 0 0 0 0 0 0 0 Use of renewable secondary fuels (RSF) Erneuerbare Sekundärbrennstoffe (RSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of non renewable secondary fuels (NRSF) Nicht erneuerbare Sekundärbrennstoffe (NRSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of net fresh water (FW) Einsatz von Süßwasserressourcen (FW) General reminder flow Input m^3 0.018462810425367 4.588711214E-05 0.000539574915 2.112112094E-08 9.221641557E-07 1.734295914E-09 -0.001428821783 Hazardous waste disposed (HWD) Gefährlicher Abfall zur Deponie (HWD) General reminder flow Output kg -1.1600457254889E-06 3.284063833E-08 -1.141773844E-08 3.625458057E-13 1.582902479E-11 0.133761071 -2.499109202E-09 Non hazardous waste disposed (NHWD) Entsorgter nicht gefährlicher Abfall (NHWD) General reminder flow Output kg 0.2393695387956 0.0001079977701 0.050205171 3.821647806E-07 1.668560411E-05 2.462024265E-05 -0.002752025947 Radioactive waste disposed (RWD) Entsorgter radioaktiver Abfall (RWD) General reminder flow Output kg 0.001578937862931 8.734596075E-07 1.802988762E-05 4.011889312E-09 1.751621294E-07 0 -0.0004209533536 Components for re-use (CRU) Komponenten für die Wiederverwendung (CRU) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for recycling (MFR) Stoffe zum Recycling (MFR) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for energy recovery (MER) Stoffe für die Energierückgewinnung (MER) General reminder flow Output kg 0 0 0 0 0 0 0 Exported electrical energy (EEE) Exportierte elektrische Energie (EEE) General reminder flow Output MJ 0 0 0.2006934989 0 0 0 0 Exported thermal energy (EET) Exportierte thermische Energie (EET) General reminder flow Output MJ 0 0 0.3663969047 0 0 0 0 Global Warming Potential total (GWP-total) Globales Erwärmungspotenzial total (GWP-total) kg CO_(2)-Äq. 3.79837906878 0.05354050216 0.1805907959 0.0002730863472 0.01213181079 0.5814666137 -0.3731996764 Global Warming Potential fossil fuels (GWP-fossil) Globales Erwärmungspotenzial fossil (GWP-fossil) kg CO_(2)-Äq. 3.94823533424 0.05295717534 0.04795872008 0.0002609722893 0.01160010943 0.4206834271 -0.372126758 Global Warming Potential biogenic (GWP-biogenic) Globales Erwärmungspotenzial biogen (GWP-biogenic) kg CO_(2)-Äq. -0.238233722114 0.0001545762591 0.1317445132 1.210779092E-05 0.0005314277359 0.1607489036 -0.0008389870184 Global Warming Potential luluc (GWP-luluc) Globales Erwärmungspotenzial luluc (GWP-luluc) kg CO_(2)-Äq. 0.088377456583784 0.0004287505593 0.0008875626052 6.267013431E-09 2.736225585E-07 3.428292166E-05 -0.0002339314552 Depletion potential of the stratospheric ozone layer (ODP) Abbau Potential der stratosphärischen Ozonschicht (ODP) kg CFC11-Äq. 1.6716509200435E-14 6.364479524E-18 1.911080856E-16 2.779853497E-20 1.213705116E-18 2.961743471E-16 -3.472942135E-15 Acidification potential of land and water (AP) Versauerungspotenzial von Boden und Wasser (AP) mol H^(+)-Äq. 0.0095711061739 0.0001587015575 0.0001269151522 3.531417747E-06 3.659342361E-05 0.0005146316652 -0.00049239117 Eutrophication potential aquatic freshwater (EP-freshwater) Eutrophierungspotenzial Süßwasser (EP-freshwater) kg PO_(4)-Äq. 1.273562023729E-05 1.609521158E-07 1.324771702E-07 5.635746051E-11 2.46060946E-09 1.015013544E-07 -4.307261867E-07 Eutrophication potential aquatic marine (EP-marine) Eutrophierungspotenzial Salzwasser (EP-marine) kg N-Äq. 0.0023548786931 7.067983108E-05 3.340673818E-05 1.601799126E-06 1.681152855E-05 0.000196782234 -0.0001302124888 Eutrophication potential terrestrial (EP-terrestrial) Eutrophierungspotenzial Land (EP-terrestrial) mol N-Äq. 0.026304881508 0.0007916068919 0.0003959482115 1.754256512E-05 0.0001850511614 0.002472735771 -0.001398880672 Formation potential of tropospheric ozone photochemical oxidants (POCP) Bildungspotential für troposphärisches Ozon (POCP) kg NMVOC-Äq. 0.0094331302742 0.0001396664772 0.0001216734019 4.814156347E-06 3.319934426E-05 0.0005110919006 -0.0003764885693 Abiotic depletion potential for non fossil resources (ADPE) Potenzial für den abiotischen Abbau nicht fossiler Ressourcen (ADPE) kg Sb-Äq. 9.128446978411E-06 3.796598536E-09 9.173570758E-08 7.897517482E-12 3.448116017E-10 4.522988231E-09 -5.662675667E-08 Abiotic depletion potential for fossil resources (ADPF) Potenzial für den abiotischen Abbau fossiler Brennstoffe (ADPF) MJ 83.863562395 0.7049790247 0.9043633955 0.00373413607 0.1630352123 0.5411165556 -6.289967502 Water use (WDP) Wassernutzung (WDP) m^(3) world-Äq. deprived 0.0417796126982 0.0004733231965 0.01547128554 5.159800529E-07 2.252808036E-05 0.153749787 -0.03450301764 Incidence of disease due to PM emissions (PM) Auftreten von Krankheiten aufgrund von Feinstaubemissionen (PM) Disease incidence Human exposure efficiency relative to U235 (IR) Wirkung durch Exposition des Menschen mit U235 (IR) kBq U235-Äq. Comparative toxic unit for ecosystems (ETP-fw) Toxizitätsvergleichseinheit für Ökosysteme (ETP-fw) CTUe Comparative toxic unit for humans (carcinogenic) (HTP-c) Toxizitätsvergleichseinheit für Menschen (krebserregend) (HTP-c) CTUh Comparative toxic unit for humans (noncarcinogenic) (HTP-nc) Toxizitätsvergleichseinheit für Menschen (nicht krebserregend) (HTP-nc) CTUh Soil quality index (SQP) Bodenqualitätsindex (SQP) SQP