0b18da3f-d5d3-4237-b33d-d885cd5ef4a5 Sustainable and permeable paving: TTE®-MultiDrainPLUS Nachhaltige Flächenbefestigung: TTE®-MultiDrainPLUS Kunststoffe Bodenbeläge Synth. Thermoplast / Polyolefin 02 Building products Civil engineering products Permanent way materials for outdoor traffic routes TTE®-MultiDrainPLUS is a massive plastic grid that is connected to an ecological building concept for unsealed traffic areas and pavements. It offers different design options and possibilities for combination, as it can be grassed or filled with concrete pavers and mineral filling materials. The Product is also available pregrassed or prefilled with TTE®-Pavers. Its key function is the distribution of load on a large area, due to an innovative frictional interlocking between the single modules. This reduces the requirements on the bearing capacity and compaction of the underground (testet by "Engineering Office Siegfried Ziegler" ibz). Therefore the efforts and CO2-emission for the underground preparation can be reduced. All variations provide a draining capacity, which guarantees full decentralized retention of heavy rainfall (testet by "Bayrische Landesanstalt für Weinbau und Gartenbau" LWG). The raw material of TTE®-MultiDrainPLUS is based on mixed recycling plastic originating from 100% post-consumer material (PCM) from “Der Grüne Punkt” (The Green Dot) and other systems for waste collection and recycling. The production process of the product is injection and intrusion moulding. For the use and application of the product the respective national provisions at the place of use apply, in Germany for example the building codes of the federal states and the corresponding national specifications. 100 % Re-use 100 % Wiederverwendung 100 % Inceration 100 % Verbrennung 100 % Landfill 100 % Deponierung 0 2022 2026 2022-07-28 TTE®-MultiDrainPLUS is produced in the following stages: melting of recycling material in an extruder forming by injection moulding or intrusion moulding, depending on the machine formed product cooled down active or passive, depending on the machine quality assurance palletising and packingQuality Management System in the production sites: ISO -9001 Declared unit: The declaration refers to 1 m² of TTE®-MultiDrainPLUS, with 27,188 kg/m². 1 m² of TTE®-MultiDrainPLUS consists of 3,125 grids of the product. TTE®-MultiDrainPLUS wird in den folgenden Schritten hergestellt: Aufschmelzen des Recyclingmaterials in einem Extruder Formgebung durch Spritzgießen oder Intrusionsgießen, je nach Maschine Abkühlung des geformten Produkts, je nach Maschine aktiv oder passiv Qualitätskontrolle Palettierung und VerpackungQualitätsmanagementsystem in den Produktionsstätten: ISO -9001 TTE®-MultiDrainPLUS is SLW 60 - certified for vehicle weights up to 60 t / 20 t axle load (certification via "Technical Inspection Association" TUEV). The static load limit of an unfilled TTE®-MultidrainPLUS grid is 147,5 kN on a 20 x 20 cm stamp, in acc. with DIN 53 454). TTE®-MultiDrainPLUS is suitable for various applications for permeable pavements and traffic areas, like parking lots and access roads for personal cars and heavy traffic, fire brigade access roads, residential streets, logistic areas, automobile logistics, maintenance paths, event areas, golf paths, campsite, temporary pavements, specific solutions for tree-root protection, weak underground, modular base and drainage for sportsfields. TTE®-MultidrainPLUS ist SLW 60 - zertifiziert für Fahrzeuggewichte bis 60 t / 20 t Achslast (Zertifizierung durch den Technischen Überwachungsverein TUEV). Die statische Belastungsgrenze eines ungefüllten TTE®-MultidrainPLUS-Gitters liegt bei 147,5 kN auf einem 20 x 20 cm großen Stempel, gemäß DIN 53 454). TTE®-MultidrainPLUS eignet sich für verschiedene Anwendungen für wasserdurchlässige Beläge und Verkehrsflächen, wie z.B. Parkplätze und Zufahrten für PKW und Schwerlastverkehr, Feuerwehrzufahrten, Wohnstraßen, Logistikflächen, Automobillogistik, Wartungswege, Veranstaltungsflächen, Golfplätze, Campingplätze, temporäre Beläge, spezifische Lösungen für den Baumwurzelschutz, schwachen Untergrund, modulare Unterbauung und Entwässerung für Sportplätze. EPD Permanent way materials for outdoor traffic routes.pdf specific dataset GaBi Database (all versions) GaBi database SP39 2019 Scope: The declaration refers to the production, transport, application and end-of-life of 1 m² TTE®-MultiDrainPLUS (without filling material). The declared product includes the surface finishes diamond nubs (MDP 2000) and round nubs (MDP 3000). The Life Cycle Assessment is based on data collected from the production sites in Weira (Germany) and Herstal (Belgium). A production average over the reference year 2018 was used. System boundary: The EPD of TTE®-MultiDrainPLUS, includes the production as well as installation, use phase and the End-of-Life of the product with four different options for disposal (closed-loop recycling, re-use, incineration and landfill). It represents a "cradle-to-gate" EPD with options. The following life cycle phases are considered: ProductionA1-A3 – Raw material supply, transport and manufacturing. InstallationA4 – Transport to building site A5 – Installation (including packaging waste processing) Use stageB1 – Use / application B2 – Maintenance B6 – Operational energy use B7 – Operational water use For use stage no further effort for TTE®-MultiDrainPLUS is required. End-of-life 4 Scenarios for End-of-life: Scenario 1: Recycling “closed loop” (C2/1, C3/1, D/1) and Scenario 2: Re-use ( C2/2, C3/2) with potential benefits for material substitution for the product TTE®-MultiDrainPLUS declared in module D (D/2), Scenario 3: Incineration with potential benefits from energy substitutions from incineration processes declared in module D (C2/3, C3/3, D/3), Scenario 4: Landfill - in some countries not applicable depending on the regulations, e.g. Germany (C2/3, C4, D/1) C1 – Deconstruction/ demolition C2 – Transport to Waste processing: C2/1 Transport to Recycling, transport to Re-use C2/2, transport to incineration and to landfill C2/3 C3 – Waste processing: C3/1 Recycling "closed-loop", C3/2 Re-use, C3/3 Incineration C4 – Landfill Benefits and loads beyond the product system boundary In module D the potential benefits given for energy substitution from incineration of packaging material in module A5 are declared for all scenarios. D/1: potential benefits from energy substitutions from incineration processes of the packaging materials in A5, D/2: potential benefits from material substitution for re-use of TTE®-MultiDrainPLUS, D/3 potential benefits from energy substitutions from incineration processes of the packaging materials and product. Sustainable and permeable paving: TTE®-MultiDrainPLUS.pdf Institut Bauen und Umwelt e. V. DIN EN 15804 ISO 14025 Hübner-Lee GmbH & Co. KG Sphera Solutions GmbH 2022-07-28T14:44:59.533 ILCD Format EPD-Datenformaterweiterungen v1.2 EPD Data Format Extensions v1.2 00.03.000 Institut Bauen und Umwelt e. V. EPD-HBL-20210070-IBB2-EN Hübner-Lee GmbH & Co. KG true Free of charge for all users and uses None Institut Bauen und Umwelt e. V. TTE®-MultiDrainPLUS: 27.188 kg/m² (3.125 grids) (TTE®-MultiDrainPLUS / m²) 1 Renewable primary energy as energy carrier (PERE) Erneuerbare Primärenergie als Energieträger (PERE) General reminder flow Input MJ 31.16 0.0241 6.2779 0 0 0 0 0 0.0235 0.0117 0.00203 76.3 0 5.19 2.03 -1.2 -31 -128 Renewable primary energy resources as material utilization (PERM) Erneuerbare Primärenergie zur stofflichen Nutzung (PERM) General reminder flow Input MJ 6.24 0 -6.24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Total use of renewable primary energy resources (PERT) Total erneuerbare Primärenergie (PERT) General reminder flow Input MJ 37.4 0.0241 0.0379 0 0 0 0 0 0.0235 0.0117 0.00203 76.3 0 5.19 2.03 -1.2 -31 -128 Non renewable primary energy as energy carrier (PENRE) Nicht-erneuerbare Primärenergie als Energieträger (PENRE) General reminder flow Input MJ 80.1 8.2 1.017 0 0 0 0 0 7.99 4 0.692 141 0 26.9 29.5 -5.96 -84 -636 Non renewable primary energy as material utilization (PENRM) Nicht-erneuerbare Primärenergie zur stofflichen Nutzung (PENRM) General reminder flow Input MJ 0.8 0 -0.8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Total use of non renewable primary energy resources (PENRT) Total nicht erneuerbare Primärenergie (PENRT) General reminder flow Input MJ 80.9 8.2 0.217 0 0 0 0 0 7.99 4 0.692 141 0 26.9 29.5 -5.96 -84 -636 Use of secondary material (SM) Einsatz von Sekundärstoffen (SM) General reminder flow Input kg 27.7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -27.7 0 Use of renewable secondary fuels (RSF) Erneuerbare Sekundärbrennstoffe (RSF) General reminder flow Input MJ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Use of non renewable secondary fuels (NRSF) Nicht erneuerbare Sekundärbrennstoffe (NRSF) General reminder flow Input MJ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Use of net fresh water (FW) Einsatz von Süßwasserressourcen (FW) General reminder flow Input m^3 0.0203 4.45E-05 0.00239 0 0 0 0 0 4.33E-05 2.17E-05 3.75E-06 0.0428 0 0.168 0.000499 -0.00142 -0.0209 -0.151 Hazardous waste disposed (HWD) Gefährlicher Abfall zur Deponie (HWD) General reminder flow Output kg 7.47E-08 8.69E-10 1.78E-10 0 0 0 0 0 8.47E-10 4.24E-10 7.33E-11 1.1E-07 0 1.26E-07 1.24E-07 -2.45E-09 -4.59E-08 -2.62E-07 Non hazardous waste disposed (NHWD) Entsorgter nicht gefährlicher Abfall (NHWD) General reminder flow Output kg 0.0763 4.89E-05 0.00697 0 0 0 0 0 4.77E-05 2.39E-05 4.13E-06 0.146 0 6.57 27.1 -0.00257 -0.0761 -0.274 Radioactive waste disposed (RWD) Entsorgter radioaktiver Abfall (RWD) General reminder flow Output kg 0.0116 9.43E-06 1.36E-05 0 0 0 0 0 9.19E-06 4.6E-06 7.95E-07 0.0133 0 0.00124 0.000393 -0.000481 -0.012 -0.0512 Components for re-use (CRU) Komponenten für die Wiederverwendung (CRU) General reminder flow Output kg 0 0 0 0 0 0 0 0 0 0 0 0 27.2 0 0 0 0 0 Materials for recycling (MFR) Stoffe zum Recycling (MFR) General reminder flow Output kg 0 0 0 0 0 0 0 0 0 0 0 27.2 0 0 0 0 0 0 Materials for energy recovery (MER) Stoffe für die Energierückgewinnung (MER) General reminder flow Output kg 0 0 0 0 0 0 0 0 0 0 0 0 0 27.2 0 0 0 0 Exported electrical energy (EEE) Exportierte elektrische Energie (EEE) General reminder flow Output MJ 0 0 1.43 0 0 0 0 0 0 0 0 0 0 151 0 0 0 0 Exported thermal energy (EET) Exportierte thermische Energie (EET) General reminder flow Output MJ 0 0 2.56 0 0 0 0 0 0 0 0 0 0 271 0 0 0 0 Global warming potential (GWP) Globales Erwärmungspotenzial (GWP) kg CO_(2)-Äq. 3.79 0.596 0.991 0 0 0 0 0 0.581 0.291 0.0504 11.1 0 67.8 1.86 -0.336 -4.63 -35.9 Depletion potential of the stratospheric ozone layer (ODP) Abbau Potential der stratosphärischen Ozonschicht (ODP) kg CFC11-Äq. 1.83E-13 7.66E-17 1.59E-16 0 0 0 0 0 7.46E-17 3.73E-17 6.46E-18 4.62E-13 0 2.68E-14 6.52E-15 -4.63E-15 -1.85E-13 -4.93E-13 Acidification potential of land and water (AP) Versauerungspotenzial von Boden und Wasser (AP) kg SO_(2)-Äq. 0.00656 0.000409 9.84E-05 0 0 0 0 0 0.000398 0.000199 3.68E-05 0.0171 0 0.016 0.00516 -0.000567 -0.0067 -0.0605 Eutrophication potential (EP) Eutrophierungspotenzial (EP) kg PO_(4)^(3)-Äq. 0.00112 5.92E-05 2.03E-05 0 0 0 0 0 5.75E-05 2.88E-05 5.67E-06 0.00278 0 0.00126 0.00522 -6.14E-05 -0.00109 -0.00655 Formation potential of tropospheric ozone photochemical oxidants (POCP) Bildungspotential für troposphärisches Ozon (POCP) kg Ethen-Äq. 0.000446 1.46E-05 7.96E-06 0 0 0 0 0 1.45E-05 7.24E-06 2.94E-07 0.00113 0 0.000615 0.00058 -4.5E-05 -0.000475 -0.0048 Abiotic depletion potential for non fossil resources (ADPE) Potenzial für den abiotischen Abbau nicht fossiler Ressourcen (ADPE) kg Sb-Äq. 1.81E-06 1.63E-08 9.19E-09 0 0 0 0 0 1.59E-08 7.94E-09 1.37E-09 4.62E-06 0 4.65E-06 3.61E-07 -6.06E-08 -1.83E-06 -6.46E-06 Abiotic depletion potential for fossil resources (ADPF) Potenzial für den abiotischen Abbau fossiler Brennstoffe (ADPF) MJ 51.5 8.18 0.183 0 0 0 0 0 7.97 3.99 0.69 108 0 23.8 28.5 -4.74 -53.6 -507