f0834580-1cce-4649-b54b-630d34181181Electromechanical building hardware and swing door operatorsElektromechanische Schlösser, Beschläge und DrehtürantriebeKomponenten von Fenstern und VorhangfassadenBeschlägeStahlbeschläge02 Building productsDoors, windows, shutters, and related productsBuilding Hardware productsThis ARGE EPD covers electromechanical building hardware and swing door operators used to control access on doors or gates, or enable opening, holding open and closing of a door or window, designed to potentially being integrated into access control systems, building security and/or automation systems, etc.
There are 2 principal versions of such electromechanical hardware devices:
- battery-powered
- with external power supplyDiese ARGE EPD umfasst elektromechanische Sicherheitseinrichtungen, die zur Steuerung oder Ermöglichung der Türöffnung konzipiert sind und in elektronische Kontrollsysteme wie Alarmanlagen, Überwachungssysteme, Fernzugriff, Fingerabdruckscanner usw. integriert sind.
Es gibt 2 Arten von Konfigurationen:
- batteriegespeist
- netzbetrieben.B6/1 battery connected deviceB6/1 batteriebetriebenes GerätB6/2 grid-connected deviceB6/2 netzgekoppeltes Gerät0The manufacture of electromechanical locking fittings normally takes place in 3 steps: 1. prefabrication of semi-finished products This step may include surface treatment at the factory or at external manufacturers. 2. pre-assembly of the components (in the factory) 3. final assembly (factory premises)
Technical data:
Ideally, products should comply with a suitable technical specification. EN 14846:2008, Building hardware – Locks and latches – Electromechanically operated locks and striking plates – Requirements and test methods is an example of such a specification and some products will comply with it.
Declared unit:
The declared unit for all products covered by ARGE EPD is 1 kg (of product). Since individual products will rarely weigh exactly 1 kg it is necessary to establish the exact weight of the product then use this as a correction factor to determine the true values for 1 kg of product in the tables (Section 5).Die Herstellung von elektromechanischen Schlössern, Beschlägen und Drehtürantrieben erfolgt normalerweise in 3 Schritten:
1. Vorfertigung der Halbzeuge Dieser Schritt kann eine Oberflächenbehandlung im Werk oder bei externen Herstellern beinhalten.
2. Vormontage der Baugruppen (im Werk)
3. Endmontage (Werksgelände)
Technische Daten:
s. EPD
Deklarierte Einheit:
1 kg elektromechanische Schlösser, Beschläge und DrehtürantriebeThese products are designed to be integrated into or installed on door, gate and window assemblies consisting of various materials and used for various applications. They may be used for either interior or exterior doors, gates or windows, in accordance with manufacturer's instructions.Diese Produkte sind so konzipiert, dass sie in Türkonstruktionen aus verschiedenen Materialien und für verschiedene Anwendungen integriert werden können. Sie können sowohl für Innen- als auch für Außentüren verwendet werden, in Übereinstimmung mit den Anweisungen des Herstellers.EPDBuilding Hardware products.pdfrepresentative datasetecoinvent database (all versions)ecoinvent 3.8 databaseScope:
This ARGE EPD covers electromechanical building hardware and swing door operators used to control access on doors or gates, or enable door or window opening and closing, as well as holding open of a door or window by means of electrical impulse. Several products of this product group have been assessed in separate LCA; from these LCA the worst values per indicator and module are declared as worst-case assumption. It can therefore be used to cover all electromechanical access control devices for doors and gates, as well as devices for opening, hold open and closing of doors, gates and windows manufactured in Europe by ARGE member companies.
System boundary:
Type of the EPD: "cradle to gate with options, with modules C1 – C4, and module D (A1-A3, C1-C3, D and additional modules)"
The analysis of the product life cycle includes the production and transport of the raw materials, manufacture of the product and the packaging materials which are declared in modules A1-A3.
Losses during production are considered as waste and are sent for recycling. No recycling processes are taken into account except transport and electricity consumption for grinding the metals. When recycled metals are used as raw material only their transformation process is taken into account and not the extraction of the raw material.
A4 module represents the transport of the finished electromechanical building hardware or swing door operator to the installation site.
There is no waste associated with the installation of the product. The A5 module therefore represents only the disposal of the product packaging.
Two alternatives are declared for the power supply:
B6_1: replacement of the battery every 2 years (for battery-powered devices)
B6_2: energy consumption from the grid (for grid-connected devices)
The End-of-Life (EoL) stages are also considered. The transportation to the EoL disposal site is taken into account in module C2. Module C4 covers the disposal of the electromechanical building hardware or swing door operator. Module C3 covers the recycling of the individual elements according to European averages, with the remaining waste divided between incineration and landfill.
Such a mixed scenario is declared due to the complex material mix of the product and the dependency of the EoL-route on the EoL-route of the product the electromechanical building hardware or swing door operator has been integrated into.
In practice, the end of life has been modelled as follows:
when a material is sent for recycling, generic transport and electric consumption of a shredder is taken into account (corresponding to the process Grinding, metals). Only then, is the material considered to have attained the end of waste state.
each type of waste is modelled as a transport to the treatment site with a distance of 30 km. Parts sent for recycling include electricity consumption (grinding) and a flow (Materials for recycling, unspecified).Gültigkeitsbereich:
Diese ARGE EPD umfasst elektromechanische Hardware-Sicherheitsvorrichtungen, die das Öffnen von Türen durch elektrische Impulse steuern oder ermöglichen. Mehrere Produkte dieser Produktgruppe wurden in separaten Ökobilanzen bewertet; aus diesen Ökobilanzen werden die schlechtesten Werte pro Indikator und Modul als Worst-Case-Annahme deklariert; sie kann daher für alle in Europa von ARGE-Mitgliedsunternehmen hergestellten Türschließvorrichtungen verwendet werden.
Systemgrenze:
"Wiege bis zum Werkstor mit Optionen, mit Modulen C1 - C4 und Modul D (A1-A3, C1-C3, D und Zusatzmodule)"Electromechanical building hardware and swing door operators.pdfInstitut Bauen und Umwelt e. V.DIN EN 15804+A2ISO 14025ARGE – The European Federation of Locks and Building Hardware ManufacturersDr. Frank Werner - Umwelt & Entwicklung2024-04-02T00:00:00ILCD FormatEPD-Datenformaterweiterungen v1.2EPD Data Format Extensions v1.200.05.000Electromechanical hardwareInstitut Bauen und Umwelt e. V.EPD-ARG-20230552-IBG3-ENARGE – The European Federation of Locks and Building Hardware ManufacturerstrueFree of charge for all users and usesNoneInstitut Bauen und Umwelt e. V.Electromechanical building hardware and swing door operators (Elektromechanische Schlösser, Beschläge und Drehtürantriebe)1Renewable primary energy as energy carrier (PERE)Erneuerbare Primärenergie als Energieträger (PERE)General reminder flowInputMJ21.47596871376760.143720719171204-0.6858502749490182.56284373851911942.20028885771600.003963309037122580.09175986281976960.006712232923978591.33202380772662Renewable primary energy resources as material utilization (PERM)Erneuerbare Primärenergie zur stofflichen Nutzung (PERM)General reminder flowInputMJ2.34812078672880-0.61795138126560000000Total use of renewable primary energy resources (PERT)Total erneuerbare Primärenergie (PERT)General reminder flowInputMJ23.82408950049640.143720719171204-1.303801656214622.56284373851911942.20028885771600.003963309037122580.09175986281976960.006712232923978591.33202380772662Non renewable primary energy as energy carrier (PENRE)Nicht-erneuerbare Primärenergie als Energieträger (PENRE)General reminder flowInputMJ131.35707276807910.22636479455550.21692076529073619.32286413086474315.4519221190700.282006966294770.2391823436152330.1114289802672776.84533953685171Non renewable primary energy as material utilization (PENRM)Nicht-erneuerbare Primärenergie zur stofflichen Nutzung (PENRM)General reminder flowInputMJ1.432321085520-0.14843269080000000Total use of non renewable primary energy resources (PENRT)Total nicht erneuerbare Primärenergie (PENRT)General reminder flowInputMJ132.78939385359910.22636479455550.068488074490736219.32286413086474315.4519221190700.282006966294770.2391823436152330.1114289802672776.84533953685171Use of secondary material (SM)Einsatz von Sekundärstoffen (SM)General reminder flowInputkg0.446925462110446000000000Use of renewable secondary fuels (RSF)Erneuerbare Sekundärbrennstoffe (RSF)General reminder flowInputMJ0000000000Use of non renewable secondary fuels (NRSF)Nicht erneuerbare Sekundärbrennstoffe (NRSF)General reminder flowInputMJ0000000000Use of net fresh water (FW)Einsatz von Süßwasserressourcen (FW)General reminder flowInputm^30.1616977475606090.001084418549138545.13165843368281E-050.0188497894943562.8415931275299102.99044275634632E-050.0002746868194191550.0002229958751220080.00666037106896534Hazardous waste disposed (HWD)Gefährlicher Abfall zur Deponie (HWD)General reminder flowOutputkg0.001472342024706152.66856375897778E-052.4925836907776E-070.0007992577644882330.0034091780331983307.35895486961457E-074.47112559092517E-072.14992541139619E-070.000191656366369332Non hazardous waste disposed (NHWD)Entsorgter nicht gefährlicher Abfall (NHWD)General reminder flowOutputkg4.712342860323130.5381723621180580.004051361566873880.55302403918449317.188594693841300.01484089001649980.0137253021610830.3796511469515790.171487118466695Radioactive waste disposed (RWD)Entsorgter radioaktiver Abfall (RWD)General reminder flowOutputkg0.002118234975093640.0001479122255591019.43269618467588E-079.02157457040162E-050.057349186619327104.07889595626762E-061.95340189958666E-061.41469731334342E-065.48877154215519E-05Components for re-use (CRU)Komponenten für die Wiederverwendung (CRU)General reminder flowOutputkg0000000000Materials for recycling (MFR)Stoffe zum Recycling (MFR)General reminder flowOutputkg0.28900.16052923100000.67198728111596400Materials for energy recovery (MER)Stoffe für die Energierückgewinnung (MER)General reminder flowOutputkg0000000000Exported electrical energy (EEE)Exportierte elektrische Energie (EEE)General reminder flowOutputMJ0000000000Exported thermal energy (EET)Exportierte thermische Energie (EET)General reminder flowOutputMJ0000000000Global Warming Potential total (GWP-total)Globales Erwärmungspotenzial total (GWP-total)kg CO_(2) eq11.80002023434640.6745187102084320.3141708262764821.47752294955522203.21262651085800.01860083998531070.01856151153260210.04932701893640280.484908897593144Global Warming Potential fossil fuels (GWP-fossil)Globales Erwärmungspotenzial fossil (GWP-fossil)kg CO_(2) eq12.0408214703010.6742490676732080.02264661158088851.47483374298519202.70556599993300.01859340419802260.01853007175289810.04932326708603970.484161728137584Global Warming Potential biogenic (GWP-biogenic)Globales Erwärmungspotenzial biogen (GWP-biogenic)kg CO_(2) eq-0.26903295193255600.2915224153453330000000Global Warming Potential luluc (GWP-luluc)Globales Erwärmungspotenzial luluc (GWP-luluc)kg CO_(2) eq0.02823171597799410.0002696425352240651.79935026011985E-060.002689206570029050.50706051092520307.4357872880746E-063.14397797039604E-053.75185036308955E-060.000747169455560356Depletion potential of the stratospheric ozone layer (ODP)Abbau Potential der stratosphärischen Ozonschicht (ODP)kg CFC11 eq6.48302936168937E-071.56244456821446E-071.02159334502129E-091.1493146117607E-071.04552141890974E-0504.30866942005128E-098.96383106456637E-101.51785326981399E-093.20317568338202E-08Acidification potential of land and water (AP)Versauerungspotenzial von Boden und Wasser (AP)mol H^(+) eq0.3078533819691710.001914712513372931.95310085751155E-050.03070449824171491.1073345088057805.28009980154835E-050.0002031525179540544.35162298237373E-050.0235152045627459Eutrophication potential aquatic freshwater (EP-freshwater)Eutrophierungspotenzial Süßwasser (EP-freshwater)kg P eq0.001871354234963124.80792500862094E-063.73531402237986E-080.0001664474972727810.02273539644664701.32585564185605E-071.06088728687181E-068.24003679443635E-087.47391591944855E-05Eutrophication potential aquatic marine (EP-marine)Eutrophierungspotenzial Salzwasser (EP-marine)kg N eq0.03851095080770440.0003805034889725966.4592013128374E-060.002354824083443810.13766397733983501.04929402329619E-051.67383353815757E-051.75895494257875E-050.00101609943750471Eutrophication potential terrestrial (EP-terrestrial)Eutrophierungspotenzial Land (EP-terrestrial)mol N eq0.2803672832068790.004241240536411956.99483513192437E-050.02808096218623691.5956404878657500.0001169584110315250.000184839468180610.0001703730262391740.0139500586187622Formation potential of tropospheric ozone photochemical oxidants (POCP)Bildungspotential für troposphärisches Ozon (POCP)kg NMVOC eq0.07769721808866250.001630156911146842.02992459012829E-050.008526714104736840.43969192357449904.49539610929706E-055.78166707019746E-054.9765098547972E-050.00422978158298466Abiotic depletion potential for non fossil resources (ADPE)Potenzial für den abiotischen Abbau nicht fossiler Ressourcen (ADPE)kg Sb eq0.004066507713143732.39046812005585E-061.61882395531049E-080.0005704367099150570.0019673630441360906.59206547100897E-087.77516671062036E-072.25782693129193E-080.000566029296187919Abiotic depletion potential for fossil resources (ADPF)Potenzial für den abiotischen Abbau fossiler Brennstoffe (ADPF)MJ129.21168572449710.22269290124720.068463585013270119.28941114211564274.5856238286800.2819057084662810.2380312738729170.1113842454001526.81643522013055Water use (WDP)Wassernutzung (WDP)m^(3) world eq deprived5.06392430660560.03111630154626820.0003362924842502130.83468561709475950.695044983600200.000858077525852410.0098705916243242-0.0003163586906696970.414108680239433Incidence of disease due to PM emissions (PM)Auftreten von Krankheiten aufgrund von Feinstaubemissionen (PM)Disease incidence1.28674846763326E-065.41697800453652E-083.97688136874896E-101.34331474578954E-073.23951539287553E-0601.49381091349113E-091.18583542056352E-091.04692486641181E-095.37547293016362E-08Human exposure efficiency relative to U235 (IR)Wirkung durch Exposition des Menschen mit U235 (IR)kBq U235 eq0.7953017415855280.04438337563914360.0002848823575397390.056365885926082638.883105509814100.001223936498390880.001321993535014610.0005017231709240460.0350812137596424Comparative toxic unit for ecosystems (ETP-fw)Toxizitätsvergleichseinheit für Ökosysteme (ETP-fw)CTUe2539.850740490658.023761502924040.0587386740925841217.9860566468762673.9328901227700.221266958999651.0592588597447254.7730481928639128.492802340277Comparative toxic unit for humans (carcinogenic) (HTP-c)Toxizitätsvergleichseinheit für Menschen (krebserregend) (HTP-c)CTUh6.78745199084754E-082.58059165097906E-103.6412187443129E-128.96306108120354E-098.58150130182987E-0807.11635891500437E-122.12607298992026E-111.2222186218589E-115.60462472466721E-09Comparative toxic unit for humans (noncarcinogenic) (HTP-nc)Toxizitätsvergleichseinheit für Menschen (nicht krebserregend) (HTP-nc)CTUh3.43167194433226E-068.10796383271977E-091.44354451689994E-103.52957640449984E-072.70460436191329E-0602.23588961398126E-105.82425795148904E-103.95598068044848E-103.81407899768558E-07Soil quality index (SQP)Bodenqualitätsindex (SQP)SQP113.8077499854957.125158524066140.045801675085276811.2366786468113821.83871518486500.1964866675605960.07523596370566570.1887359351106038.77171672282894