778ff18e-67fe-4aca-a44e-164de984271b Dispersion-based products, group 1 Dispersionsbasierte Produkte, Gruppe 1 Beschichtungen Innenbeschichtungen Dispersionsklebstoffe 02 Building products Construction adhesives and coatings Dispersion adhesives and primers for floor coverings This EPD comprises dispersion-based products with a Volatile Organic Compound (VOC) content ≤1 % (VOC definition according to Decopaint Directive). The products typically consist of organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, functions in the construction, furnishing and repair of buildings. Using dispersion-based products decisively improves the fitness for use of structures and extends their life expectancy. The product displaying the highest environmental impacts within the class of dispersion-based products considered was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). 0 This EPD comprises dispersion-based products with a Volatile Organic Compound (VOC) content ≤1 % (VOC definition according to Decopaint Directive). The products typically consist of organic binding agents based on synthetic and/or natural resins, mineral fillers such as chalk as well as water and smaller volumes of auxiliaries (thickening agents, defoaming agents, surface-active agents, preservatives etc.). They dry physically through evaporation of the water contained therein. They comply with manifold, often specific, functions in the construction, furnishing and repair of buildings. Using dispersion-based products decisively improves the fitness for use of structures and extends their life expectancy. According to the Model EPD system (IBU) and the guideline and the substance list (available for members of the trade associations FEICA, EFCC, IVK and DBC), the environmental impacts of the substances are condensed to a single score; the single score of a formulation is calculated based on the single score of the substances. The products are grouped according to their single score (group 1 to 4), the formulation displaying the highest environmental impacts was used as a representative product for calculating the Life Cycle Assessment results (worst-case approach). Technical data: The density of the products is between 1,00 and 1,50 g/cm³, other relevant technical data can be found in the manufacturer’s technical documentation. Module 1: Dispersion adhesives, fixatives, precoatings and primers for floor coverings and parquet flooring Dispersion adhesives for floor coverings have to comply with the requirements of the EN ISO 22636. The mechanical requirements of EN ISO 22636 don’t apply to fixatives; their strengths are lower in accordance with their specifications. The performance characteristics of precoatings and primers are subject to the manufacturer's technical documentation/declaration of performance. Dispersion adhesives for parquet: The test procedures and requirements of the EN ISO 17178 have to be fulfilled. Module 2: Dispersion-based tile adhesive The requirements on essential characteristics according to EN 12004, must be maintained. These are: Tensile adhesion strength after dry storage (EN 12004-2) -Tensile adhesion strength after water immersion (EN 12004-2) -Tensile adhesion strength after heat ageing (EN 12004) -Tensile adhesion strength after freeze/thaw cycles (EN 12004-2) -Open time: Tensile strength (EN 12004-2) Further essential characteristics in accordance with the manufacturer's technical documentation Module 3: Dispersion-based adhesives and sealants Performance characteristics in accordance with the manufacturer's technical documentation/declaration of performance Module 4: Dispersion-based products for waterproofing of buildings The minimum requirement of EAD 030352-00-0503 -Liquid applied watertight covering kits for wet room floors and/or walls- must be maintained. The essential characteristics are to be specified in accordance with the European technical assessment (ETA, specification no.). Module 5: Dispersion-based primers and bonding agents for concrete and floor screeds Performance characteristics in accordance with the manufacturer's technical documentation Module 6: Dispersion-based products for surface protection of concrete The requirements on essential characteristics for all intended uses in accordance with EN 1504-2, Tables 1 and 5, must be maintained. These are: - Permeability to CO2 (EN 1062-6) - Water vapour permeability (EN ISO 7783-1/-2) - Capillary absorption and permeability to water (EN 1062-3) - Adhesion strength by pull-off test (EN 1542) Further essential characteristics in accordance with the manufacturer's technical documentation/declaration of performance Module 7: Dispersion-based primers and barrier coatings The requirements of the Decopaint Directive must be maintained. Essential characteristics in accordance with the manufacturer's technical documentation/declaration of performance. Declared unit: This EPD refers to the declared unit of 1 kg of dispersion-based product, group 1; applied into the building with a density of 1,000 - 1,500 kg/m³ in accordance with the IBU PCR part B for dispersion adhesives and primers for floor coverings. The results of the Life Cycle Assessment provided in this declaration have been selected from the product with the highest environmental impact (worst-case scenario). Depending on the application, a corresponding conversion factor such as the density to convert volumetric use to mass must be taken into consideration. The Declaration type is according to EN 15804: Cradle to gate with options, modules C1–C3, and module D (A1–A3, C, D) and additional modules (A4-A5). Diese EPD umfasst Produkte auf Dispersionsbasis mit einem Gehalt an flüchtigen organischen Verbindungen (VOC) von ≤1 % (VOC-Definition gemäß Decopaint-Richtlinie). Die Produkte bestehen typischerweise aus organischen Bindemitteln auf Basis von Kunst- und/oder Naturharzen, mineralischen Füllstoffen wie Kreide sowie Wasser und kleineren Mengen an Hilfsstoffen (Verdickungsmittel, Entschäumer, oberflächenaktive Mittel, Konservierungsmittel etc.) Sie trocknen physikalisch durch Verdunstung des darin enthaltenen Wassers. Sie erfüllen vielfältige, oft spezifische Funktionen beim Bauen, Einrichten und Instandsetzen von Gebäuden. Durch den Einsatz von Produkten auf Dispersionsbasis wird die Gebrauchstauglichkeit von Bauwerken entscheidend verbessert und deren Lebensdauer verlängert. Nach dem Muster-EPD-System (IBU) und dem Leitfaden und der Stoffliste (erhältlich für Mitglieder der Fachverbände FEICA, EFCC, IVK und DBC) werden die Umweltwirkungen der Stoffe zu einer Einzelnote verdichtet; die Einzelnote einer Formulierung wird aus der Einzelnote der Stoffe berechnet. Die Produkte werden entsprechend ihrer Einzelpunktzahl in Gruppen eingeteilt (Gruppe 1 bis 4), wobei die Formulierung mit den höchsten Umweltauswirkungen als repräsentatives Produkt für die Berechnung der Ökobilanzergebnisse verwendet wurde (Worst-Case-Ansatz). Dispersion-based products are used for the following applications: Module 1: Dispersion adhesives, fixatives, precoatings and primers for floor coverings and parquet flooring Adhesives for, e.g. tufted carpets with various backings, woven textile coverings, fibre-bonded and natural fibre coverings, resilient coverings (PVC, rubber, PVC-free luxury vinyl tiles), linoleum, insulating bases and underlays, parquet, laminate and wood blocks on surfaces ready for laying. The products are suitable for normal wear in residential and commercial areas, also on heated floor constructions. Module 2: Dispersion-based tile adhesive Products for bonding ceramic tiles and paving as well as natural stone for internal and external installations on walls, floors and ceilings Module 3: Dispersion-based adhesives and sealants As structural adhesives and sealants: ·structural and repair adhesives, dispersion filler compounds, joint sealants Module 4: Dispersion-based products for waterproofing of buildings Products for waterproofing floors and/or walls in wet rooms inside buildings Module 5: Dispersion-based primers and bonding agents for concrete and floor screeds Products to improve the adhesion of e.g. self-levelling compounds or repair mortars on absorbent cement and calcium sulphate screeds, concrete, dry construction boards Module 6: Dispersion-based products for surface protection of concrete To increase the durability of concrete and reinforced steel structures as well as for new concrete and for maintenance and repair work (for areas without vehicle traffic) Module 7: Dispersion-based primers and barrier coatings Products to protect a substrate from e.g. the immersion of water, thus preventing degradation, corrosion or damage Produkte auf Dispersionsbasis werden für die folgenden Anwendungen eingesetzt: Modul 1: Dispersionsklebstoffe, Fixiermittel, Vorbeschichtungen und Grundierungen für Bodenbeläge und Parkettböden Klebstoffe für z.B. getuftete Teppichböden mit verschiedenen Rückenbeschichtungen, gewebte Textilbeläge, fasergebundene und Naturfaserbeläge, elastische Beläge (PVC, Kautschuk, PVC-freie Vinylfliesen), Linoleum, Dämm- und Unterlagsböden, Parkett, Laminat und Holzpflaster auf verlegefertigen Untergründen. Die Produkte sind für die normale Beanspruchung im Wohn- und Gewerbebereich geeignet, auch auf beheizten Fußbodenkonstruktionen. Modul 2: Fliesenkleber auf Dispersionsbasis Produkte zum Verkleben von keramischen Fliesen und Platten sowie Naturstein für die Innen- und Außenverlegung an Wand, Boden und Decke Modul 3: Dispersionsklebstoffe und Dichtstoffe Als Konstruktionsklebstoffe und Dichtstoffe: -Struktur- und Reparaturklebstoffe, Dispersionsspachtelmassen, Fugendichtstoffe Modul 4: Dispersionsprodukte für die Bauwerksabdichtung Produkte für die Abdichtung von Böden und/oder Wänden in Feuchträumen innerhalb von Gebäuden Modul 5: Grundierungen und Haftvermittler auf Dispersionsbasis für Beton und Estriche Produkte zur Verbesserung der Haftung von z. B. Nivelliermassen oder Reparaturmörteln auf saugfähigen Zement- und Calciumsulfatestrichen, Beton, Trockenbauplatten Modul 6: Dispersionsbasierte Produkte für den Oberflächenschutz von Beton Zur Erhöhung der Dauerhaftigkeit von Beton- und Stahlkonstruktionen sowie für Neubeton und für Wartungs- und Instandsetzungsarbeiten (für Bereiche ohne Fahrzeugverkehr) Modul 7: Grundierungen und Sperrbeschichtungen auf Dispersionsbasis Produkte, die ein Substrat z. B. vor dem Eintauchen in Wasser schützen und so Zersetzung, Korrosion oder Schäden verhindern EPD Dispersion adhesives and primers for floor coverings.pdf template dataset GaBi Database (all versions) GaBi database SP40 2020 Scope: This verified EPD entitles the holder to bear the symbol of the Institut Bauen und Umwelt e.V. It exclusively applies to products produced in Europe and applies to a period of five years from the date of issue. This EPD may be used by members of DBC, EFCC, FEICA and IVK and their members provided it has been proven that the respective product can be represented by this EPD. For this purpose, a guideline is available at the secretariats of the four associations. The members of the associations are listed on their respective websites. System boundary: Modules A1, A2 and A3 are taken into consideration in the LCA: - A1 Production of preliminary products - A2 Transport to the plant - A3 Production incl. provision of energy, production of packaging as well as auxiliaries and consumables and waste treatment - A4 Transport to site - A5 Installation, product applied into the building during A5 phase operations and packaging disposal. The end of life for the packaging material considered is described below: -Incineration, for materials like plastic and wood. -C1-C2-C3-D The building deconstruction (demolition process) takes place in the C1 module which considers energy production and consumption in terms of diesel and all the emissions connected with the fuel-burning process to run the machines. After the demolition, the product is transported to the end-of-life processing (C2 module) where all the impacts related to the transport processes are considered. For precautionary principle and as a worst-case scenario, thermal treatment is the only end of life scenario considered. This is modelled by the incineration process (module C3) where the product ends its life cycle. Module D accounts for potential benefits that are beyond the defined system boundaries. Credits are generated during the incineration of wastes and related electricity produced that are occurring in the A5 module. Dispersion-based products, group 1 .pdf Institut Bauen und Umwelt e. V. DIN EN 15804+A2 ISO 14025 FEICA - Association of the European Adhesive and Sealant Industry Sphera Solutions GmbH 2022-06-08T14:45:43.655 ILCD Format EPD-Datenformaterweiterungen v1.2 EPD Data Format Extensions v1.2 00.03.000 Dispersion-based products, solvent-free Institut Bauen und Umwelt e. V. EPD-DBC-20220146-IBF1-EN FEICA - Association of the European Adhesive and Sealant Industry true Free of charge for all users and uses None Institut Bauen und Umwelt e. V. Dispersion-based product, group 1 (of dispersion-based product, group 1) 1 Renewable primary energy as energy carrier (PERE) Erneuerbare Primärenergie als Energieträger (PERE) General reminder flow Input MJ 4.662024691218 0.03785464253 0.6432660859 1.201458581E-05 0.0005245659266 0.09362619296 -1.32183245 Renewable primary energy resources as material utilization (PERM) Erneuerbare Primärenergie zur stofflichen Nutzung (PERM) General reminder flow Input MJ 0.585 0 -0.585 0 0 0 0 Total use of renewable primary energy resources (PERT) Total erneuerbare Primärenergie (PERT) General reminder flow Input MJ 5.247024691218 0.03785464253 0.05826608588 1.201458581E-05 0.0005245659266 0.09362619296 -1.32183245 Non renewable primary energy as energy carrier (PENRE) Nicht-erneuerbare Primärenergie als Energieträger (PENRE) General reminder flow Input MJ 17.771096073 0.6741025842 1.314307946 0.003814072491 0.1665252971 14.85218467 -6.70452523 Non renewable primary energy as material utilization (PENRM) Nicht-erneuerbare Primärenergie zur stofflichen Nutzung (PENRM) General reminder flow Input MJ 15.2526 0 -0.9526 0 0 -14.3 0 Total use of non renewable primary energy resources (PENRT) Total nicht erneuerbare Primärenergie (PENRT) General reminder flow Input MJ 33.023696075 0.6741025842 0.3617079463 0.003814072491 0.1665252971 0.5521846688 -6.70452523 Use of secondary material (SM) Einsatz von Sekundärstoffen (SM) General reminder flow Input kg 0 0 0 0 0 0 0 Use of renewable secondary fuels (RSF) Erneuerbare Sekundärbrennstoffe (RSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of non renewable secondary fuels (NRSF) Nicht erneuerbare Sekundärbrennstoffe (NRSF) General reminder flow Input MJ 0 0 0 0 0 0 0 Use of net fresh water (FW) Einsatz von Süßwasserressourcen (FW) General reminder flow Input m^3 0.011872353209357 4.383307847E-05 0.0005031047194 2.155216422E-08 9.409838324E-07 0.003702831056 -0.001531200119 Hazardous waste disposed (HWD) Gefährlicher Abfall zur Deponie (HWD) General reminder flow Output kg 8.735E-09 3.14E-08 1.23E-10 3.7E-13 1.62E-11 1.77E-09 -2.66E-09 Non hazardous waste disposed (NHWD) Entsorgter nicht gefährlicher Abfall (NHWD) General reminder flow Output kg 0.013021 0.000103 0.00235 3.9E-07 1.7E-05 0.136 -0.00294 Radioactive waste disposed (RWD) Entsorgter radioaktiver Abfall (RWD) General reminder flow Output kg 0.00065647 8.34E-07 8.31E-06 4.09E-09 1.79E-07 2.51E-05 -0.000451 Components for re-use (CRU) Komponenten für die Wiederverwendung (CRU) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for recycling (MFR) Stoffe zum Recycling (MFR) General reminder flow Output kg 0 0 0 0 0 0 0 Materials for energy recovery (MER) Stoffe für die Energierückgewinnung (MER) General reminder flow Output kg 0 0 0 0 0 0 0 Exported electrical energy (EEE) Exportierte elektrische Energie (EEE) General reminder flow Output MJ 0 0 0.277 0 0 0 0 Exported thermal energy (EET) Exportierte thermische Energie (EET) General reminder flow Output MJ 0 0 0.501 0 0 0 0 Global Warming Potential total (GWP-total) Globales Erwärmungspotenzial total (GWP-total) kg CO_(2)-Äq. 1.3199 0.0511 0.173 0.000279 0.0124 0.945 -0.398 Global Warming Potential fossil fuels (GWP-fossil) Globales Erwärmungspotenzial fossil (GWP-fossil) kg CO_(2)-Äq. 1.3645 0.0506 0.0881 0.000266 0.0118 0.429 -0.397 Global Warming Potential biogenic (GWP-biogenic) Globales Erwärmungspotenzial biogen (GWP-biogenic) kg CO_(2)-Äq. -0.05047 0.000148 0.0853 1.24E-05 0.000542 0.515 -0.000896 Global Warming Potential luluc (GWP-luluc) Globales Erwärmungspotenzial luluc (GWP-luluc) kg CO_(2)-Äq. 0.00045242 0.00041 6.04E-06 6.39E-09 2.79E-07 3.5E-05 -0.000251 Depletion potential of the stratospheric ozone layer (ODP) Abbau Potential der stratosphärischen Ozonschicht (ODP) kg CFC11-Äq. 2.998408E-14 6.08E-18 3.18E-16 2.84E-20 1.24E-18 3.02E-16 -3.72E-15 Acidification potential of land and water (AP) Versauerungspotenzial von Boden und Wasser (AP) mol H^(+)-Äq. 0.004896 0.000152 7.29E-05 3.6E-06 3.73E-05 0.000525 -0.000526 Eutrophication potential aquatic freshwater (EP-freshwater) Eutrophierungspotenzial Süßwasser (EP-freshwater) kg PO_(4)-Äq. 2.64504E-05 1.54E-07 2.68E-07 5.75E-11 2.51E-09 1.04E-07 -4.62E-07 Eutrophication potential aquatic marine (EP-marine) Eutrophierungspotenzial Salzwasser (EP-marine) kg N-Äq. 0.0010275 6.75E-05 1.75E-05 1.63E-06 1.72E-05 0.000201 -0.000139 Eutrophication potential terrestrial (EP-terrestrial) Eutrophierungspotenzial Land (EP-terrestrial) mol N-Äq. 0.012363 0.000756 0.000236 1.79E-05 0.000189 0.00252 -0.00149 Formation potential of tropospheric ozone photochemical oxidants (POCP) Bildungspotential für troposphärisches Ozon (POCP) kg NMVOC-Äq. 0.003628 0.000133 5.62E-05 4.91E-06 3.39E-05 0.000522 -0.000402 Abiotic depletion potential for non fossil resources (ADPE) Potenzial für den abiotischen Abbau nicht fossiler Ressourcen (ADPE) kg Sb-Äq. 6.495E-07 3.63E-09 6.77E-09 8.06E-12 3.52E-10 4.62E-09 -6.06E-08 Abiotic depletion potential for fossil resources (ADPF) Potenzial für den abiotischen Abbau fossiler Brennstoffe (ADPF) MJ 32.95 0.673 0.361 0.00381 0.166 0.552 -6.7 Water use (WDP) Wassernutzung (WDP) m^(3) world-Äq. deprived 0.45995 0.000452 0.021 5.27E-07 2.3E-05 0.157 -0.037 Incidence of disease due to PM emissions (PM) Auftreten von Krankheiten aufgrund von Feinstaubemissionen (PM) Disease incidence Human exposure efficiency relative to U235 (IR) Wirkung durch Exposition des Menschen mit U235 (IR) kBq U235-Äq. Comparative toxic unit for ecosystems (ETP-fw) Toxizitätsvergleichseinheit für Ökosysteme (ETP-fw) CTUe Comparative toxic unit for humans (carcinogenic) (HTP-c) Toxizitätsvergleichseinheit für Menschen (krebserregend) (HTP-c) CTUh Comparative toxic unit for humans (noncarcinogenic) (HTP-nc) Toxizitätsvergleichseinheit für Menschen (nicht krebserregend) (HTP-nc) CTUh Soil quality index (SQP) Bodenqualitätsindex (SQP) SQP